| HP Required | 1/2 hp |
| Inlet (In.) | 1 1/4 in |
| Outlet | 1 in |
| Wetted Materials | Carbon, Ceramic, Stainless Steel, Viton |
| Best Efficiency GPM @ Head | 38 @ 27 ft |
| Width | 6 5/8 in |
| Max. Case Pressure | 200 psi |
| Bearing Type | Ball |
| Inlet Pressure | 200 psi |
| GPM of Water @ 10 Ft. of Head | 67 |
| Includes | Mounting Base, Manual, No Motor or Drive Couplers |
| For Use With | Nonflammable and Nonabrasive Liquids |
| Manufacturers Warranty Length | 1 yr |
| Port Rotation | 4 Position |
| GPM of Water @ 30 Ft. of Head | 40 |
| Max. Specific Gravity | 1 |
| Duty | Continuous |
| Housing Material | Stainless steel |
| Impeller Type | Semi Open |
| Impeller Material | Stainless Steel |
| GPM of Water @ 40 Ft. of Head | 10 |
| Item | Pedestal Pump |
| GPM of Water @ 15 Ft. of Head | 62 |
| Inlet | 1-1/4 in |
| GPM of Water @ 20 Ft. of Head | 57 |
| Max. Pressure | 19 psi |
| Seal Material | Viton |
| Height | 6 7/8 in |
| Length | 6 5/8 in |
| Overall Length | 6.63 in |
| Overall Width | 6.63 in |
| Overall Height | 6.88 in |
| Shop By | Closeouts |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Intake Type | NPT |
| Seal Type | Mechanical |
| Sized for Horsepower | 1/2 hp |
| For Use With Potable Systems | No |
| Intake and Discharge Size | 1 1/4 in , 1 in |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Discharge Type | NPT |
| Best Efficiency Head | 27 ft |
| Flow Rate @ 30 ft of Head (Maximum) | 40 gpm |
| Best Efficiency Flow | 38 gpm |
| Compatible with Media Type | Non-Abrasive Liquids, Non-Flammable Liquids |
| Minimum Media Temperature | 40 Degrees F |
| Compatible Intake Pipe Size | 1 1/4 in |
| Impeller Design | Semi-Open |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 10 ft of Head (Maximum) | 67 gpm |
| Maximum Media Temperature | 200 Degrees F |
| Priming | Manual |
| Suction Lift (Maximum) | Not Applicable |
| Shaft Material | 304 Stainless Steel |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 15 ft of Head (Maximum) | 62 gpm |
| Pump Housing Material | Stainless Steel |
| Feet of Head (Minimum) | 10 ft |
| Manufacturer Warranty Length | 1 yr |
| Pumping Application | Aggressive Liquid Applications, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Purpose Pumping, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Transfer of Liquids, Utility, Water Circulation |
| Maximum Feet of Head | 44 ft |
| Wetted Material | Carbon, Ceramic, Stainless Steel, Viton |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 40 ft of Head (Maximum) | 10 gpm |
| Flow Rate @ 20 ft of Head (Maximum) | 57 gpm |
| Compatible Discharge Pipe Size | 1 in |
| Shaft Outside Diameter | 5/8 in |
| Specific Gravity (Maximum) | 1 |
| Phase | Three |
| Minimum Flow Rate | 10 gpm |
| System Pressure (Maximum) | 19 psi |
| Duty Cycle | Continuous |
| Maximum Flow Rate | 67 gpm |
| NPSHr | 200 psi |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Pedestal Pump, Centrifugal, HP Req. 1/2, DAYTON, Mfr# 2ZWY9
$470,99
-$284.76 / ea
with subscription
Free shipping will be applied on orders over $50
Pedestal Pump, Pump Housing Material Stainless Steel, Sized for Horsepower 1/2 hp, Flow Rate @ 10 ft of Head (Maximum) 67 gpm, Flow Rate @ 20 ft of Head (Maximum) 57 gpm, Flow Rate @ 30 ft of Head (Maximum) 40 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi, Best Efficiency Flow 38 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$470.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.