HP Required | 1/3 hp |
Inlet (In.) | 1 in |
Outlet | 3/4 in |
Wetted Materials | Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel |
Best Efficiency GPM @ Head | 30 @ 26 ft |
Max. Pressure | 19 psi |
Impeller Material | Cast Iron |
Seal Material | Buna-N |
For Use With | Nonflammable and Nonabrasive Liquids |
Item | Pedestal Pump |
Housing Material | Cast iron |
Impeller Type | Semi Open |
Includes | Mounting Base, Manual, No Motor or Drive Couplers |
GPM of Water @ 20 Ft. of Head | 34 |
Height | 6 3/8 in |
GPM of Water @ 30 Ft. of Head | 25 |
Inlet | 1 in |
GPM of Water @ 40 Ft. of Head | 10 |
Width | 5 3/4 in |
Inlet Pressure | 200 psi |
Length | 6 5/8 in |
Duty | Continuous |
GPM of Water @ 15 Ft. of Head | 37 |
Port Rotation | 4 Position |
GPM of Water @ 10 Ft. of Head | 41 |
Max. Case Pressure | 200 psi |
Max. Specific Gravity | 1.0 |
Manufacturers Warranty Length | 1 yr |
Bearing Type | Ball |
Overall Width | 5.75 in |
Overall Height | 6.38 in |
Overall Length | 6.63 in |
Priming | Manual |
Pumping Application | Aggressive Liquid Applications, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Purpose Pumping, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Transfer of Liquids, Utility, Water Circulation |
Pump Housing Material | Cast Iron |
Compatible Intake Pipe Size | 1 in |
System Pressure (Maximum) | 19 psi |
Intake and Discharge Size | 1 in , 3/4 in |
Manufacturer Warranty Length | 1 yr |
Maximum Feet of Head | 44 ft |
Flow Rate @ 20 ft of Head (Maximum) | 34 gpm |
Impeller Design | Semi-Open |
Feet of Head (Minimum) | 10 ft |
Phase | Single |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Compatible Discharge Pipe Size | 3/4 in |
Flow Rate @ 40 ft of Head (Maximum) | 10 gpm |
Duty Cycle | Continuous |
Best Efficiency Head | 26 ft |
Compatible with Media Type | Non-Abrasive Liquids, Non-Flammable Liquids |
Intake Type | NPT |
Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
Shaft Material | 304 Stainless Steel |
Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Sized for Horsepower | 1/3 hp |
Seal Type | Mechanical |
Best Efficiency Flow | 30 gpm |
For Use With Potable Systems | No |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 15 ft of Head (Maximum) | 37 gpm |
Specific Gravity (Maximum) | 1 |
Discharge Type | NPT |
NPSHr | 200 psi |
Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
Maximum Flow Rate | 41 gpm |
Maximum Media Temperature | 200 Degrees F |
Wetted Material | Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel |
Flow Rate @ 30 ft of Head (Maximum) | 25 gpm |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Shaft Outside Diameter | 5/8 in |
Minimum Media Temperature | 40 Degrees F |
Minimum Flow Rate | 10 gpm |
Suction Lift (Maximum) | Not Applicable |
Flow Rate @ 10 ft of Head (Maximum) | 41 gpm |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Pedestal Pump, Centrifugal, HP Req. 1/3, DAYTON, Mfr# 2ZWX3
$213,99
-$6.42 / ea
with subscription
Free shipping will be applied on orders over $50
Pedestal Pump, Pump Housing Material Cast Iron, Sized for Horsepower 1/3 hp, Flow Rate @ 10 ft of Head (Maximum) 41 gpm, Flow Rate @ 20 ft of Head (Maximum) 34 gpm, Flow Rate @ 30 ft of Head (Maximum) 25 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 3/4 in, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi, Best Efficiency Flow 30 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$213.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.