HP Required | 1/3 hp |
Inlet (In.) | 1 in |
Outlet | 3/4 in |
Wetted Materials | Carbon, Ceramic, Stainless Steel, Viton |
Best Efficiency GPM @ Head | 30 @ 26 ft |
GPM of Water @ 15 Ft. of Head | 37 |
Impeller Type | Semi Open |
Width | 5 3/4 in |
GPM of Water @ 20 Ft. of Head | 34 |
Height | 6 3/8 in |
Seal Material | Viton |
Impeller Material | Stainless Steel |
GPM of Water @ 30 Ft. of Head | 25 |
Port Rotation | 4 Position |
Max. Specific Gravity | 1.0 |
For Use With | Nonflammable and Nonabrasive Liquids |
GPM of Water @ 40 Ft. of Head | 10 |
Inlet | 1 in |
Manufacturers Warranty Length | 1 yr |
Inlet Pressure | 200 psi |
Max. Pressure | 19 psi |
Includes | Mounting Base, Manual, No Motor or Drive Couplers |
Length | 6 5/8 in |
Max. Case Pressure | 200 psi |
GPM of Water @ 10 Ft. of Head | 41 |
Item | Pedestal Pump |
Duty | Continuous |
Housing Material | Stainless steel |
Bearing Type | Ball |
Overall Width | 5.75 in |
Overall Height | 6.38 in |
Overall Length | 6.63 in |
NPSHr | 200 psi |
For Use With Potable Systems | No |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Pump Housing Material | Stainless Steel |
Maximum Feet of Head | 44 ft |
Minimum Media Temperature | 40 Degrees F |
Feet of Head (Minimum) | 10 ft |
Manufacturer Warranty Length | 1 yr |
Shaft Outside Diameter | 5/8 in |
Maximum Media Temperature | 200 Degrees F |
Maximum Flow Rate | 41 gpm |
Wetted Material | Carbon, Ceramic, Stainless Steel, Viton |
Shaft Material | 304 Stainless Steel |
Impeller Design | Semi-Open |
Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Intake Type | NPT |
Pumping Application | Aggressive Liquid Applications, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Purpose Pumping, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Transfer of Liquids, Utility, Water Circulation |
Sized for Horsepower | 1/3 hp |
Specific Gravity (Maximum) | 1 |
Minimum Flow Rate | 10 gpm |
Discharge Type | NPT |
Suction Lift (Maximum) | Not Applicable |
Flow Rate @ 15 ft of Head (Maximum) | 37 gpm |
Duty Cycle | Continuous |
Seal Type | Mechanical |
Compatible with Media Type | Non-Abrasive Liquids, Non-Flammable Liquids |
Intake and Discharge Size | 1 in , 3/4 in |
Best Efficiency Flow | 30 gpm |
Best Efficiency Head | 26 ft |
Phase | Three |
Flow Rate @ 10 ft of Head (Maximum) | 41 gpm |
Flow Rate @ 20 ft of Head (Maximum) | 34 gpm |
Priming | Manual |
Flow Rate @ 30 ft of Head (Maximum) | 25 gpm |
Compatible Discharge Pipe Size | 3/4 in |
System Pressure (Maximum) | 19 psi |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 40 ft of Head (Maximum) | 10 gpm |
Compatible Intake Pipe Size | 1 in |
Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Pedestal Pump, Centrifugal, HP Req. 1/3, DAYTON, Mfr# 2ZWY8
$465,99
-$12.99 / ea
with subscription
Free shipping will be applied on orders over $50
Pedestal Pump, Pump Housing Material Stainless Steel, Sized for Horsepower 1/3 hp, Flow Rate @ 10 ft of Head (Maximum) 41 gpm, Flow Rate @ 20 ft of Head (Maximum) 34 gpm, Flow Rate @ 30 ft of Head (Maximum) 25 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 3/4 in, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi, Best Efficiency Flow 30 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$465.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.