| Item | Threadlocker |
| Threadlocker Color | Red |
| Threadlocker Container | Bottle |
| Color | Red |
| Threadlocker Strength | High |
| Physical Form | Liquid |
| Container Size | 0.2 fl oz |
| Container Type | Bottle |
| Cure Type | Anaerobic |
| Temp. Range | -65 Degrees to 300 Degrees F |
| Begins to Harden | 10 min |
| Chemical Type | Anaerobic |
| Removable With | Heat and Hand Tools |
| Gap Fill | 0.008 in |
| Viscosity | 200 to 800 cP |
| Application | For Locking, Sealing, Joining, and Fastening Of Threaded Metal Components |
| Specific Gravity | 1.1 |
| Threadlocker Classification | Threadlocker |
| Threadlocker Disassembly | Permanent |
| Size | 6 mL |
| Full Cure | 24 hr |
| For Fastener Dia. | Up to 3/4 in |
| Series | PRO SEAL ANA-LOK(TM) 71 |
| Standards | ??MIL-S-22473D |
| Flash Point | 200 Degrees F |
| Maximum Operating Temperature | 300 Degrees F |
| Container Size and Type | 0.2 fl oz Bottle |
| Product Form | Liquid |
| Working Time | 10 min |
| Brand & Series | PRO SEAL ANA-LOK(TM) 71 |
| Torque and Strength | High |
| Breakaway Torque | Not Applicable |
| Container Size Range | 0.39 oz and Under |
| Working Time Range | 6 min to 10 min |
| Minimum Viscosity | 200 cps |
| Threadlocker Properties | Oil Tolerant |
| Pack Size | 1 EA |
| Full Cure Time | 1 day |
| Threadlocking Properties | Oil Tolerant |
| Properties & Color | Oil Tolerant Red |
| Maximum Viscosity | 800 cps |
| Breakaway Torque Range | 201 in-lb to 300 in-lb |
| For Maximum Thread Diameter | 3/4 in |
| Minimum Operating Temperature | -65 Degrees F |
| Container and Size | Bottle 0.39 oz and Under |
| Threadlocking Strength | High |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Threadlocker, PRO SEAL ANA-LOK(TM) 71, Red, High Strength, Liquid, 6 mL Bottle, PRO SEAL, Mfr# 27106
$3.77
Free shipping will be applied on orders over $50
Threadlocker, Threadlocking Strength High, Color Red, Series ANA-LOK(TM) 71, Container Size 0.2 fl oz, Container Type Bottle, For Maximum Thread Diameter 3/4 in, Working Time 10 min, Breakaway Torque Not Applicable, Cure Type Anaerobic, Threadlocker Properties Oil Tolerant, Standards �¿MIL-S-22473D, Flash Point 200 Degrees F, Full Cure Time 1 day, Maximum Operating Temperature 300 Degrees F, Maximum Viscosity 800 cps, Minimum Operating Temperature -65 Degrees F, Minimum Viscosity 200 cps
9999 in stock
Must order in multiples of 1
Subtotal:
$3.77
You must be logged in to post a review.
WARNING: This product can expose you to chemicals including Cumene, which is known to the State of California to cause cancer, and Ethylene glycol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.