Item - Relay
Phase Monitor Relay
Input or Control Voltage
480 to 600V AC
AC Contact Rating - Relay
10A @ 277V
DC Contact Rating - Relay
10A @ 30V
Pick Up Range
460 to 600VAC
Over Voltage
Fixed 110% of Line Voltage Setting
Under Voltage
432 to 540V AC
Phase Loss Sensitivity
Yes
Phase Loss Time Delay
0.1 sec
Phase Reversal Time Delay
0.1 sec
Phase Unbalance Time Delay
0.3 to 30.0 sec
Restart Time Delay
1 to 300 sec
Body Height - Relay
3.5 in
Contact Amp Rating (Resistive)
10
Input or Control Voltage Range
480 to 600VAC
Trip Delay
Power Up and Restart After Fault Clear: 1.00 to 300.0 sec., Phase Loss and Reversal: 100 msec., Phase Unbalance: 0.30 to 30.0 sec., Undervoltage: 0.30 to 30.0 sec., Overvoltage: 0.30 to 30.0 sec.
Input Voltage
480 to 600V AC
Overall Height - Relay
2.4 in
Standards
CE Certified, cULus Listed
Overvoltage
Fixed 110% of Line Voltage Setting
Minimum Operating Temperature
-18.4 Degrees F
Mechanical Operating Durability
10,000,000
Undervoltage
190 to 500V AC
Maximum Switching Capacity
40 VA
Contact Rating (AC)
10 A @ 277V
Monitored Parameters
Overvoltage, Phase Loss, Phase Reversal, Phase Unbalance, Undervoltage
Maximum Switching Voltage
660V
Maximum Operating Temperature
149 Degrees F
Contact Rating (DC)
10 A @ 30V
Electrical Operating Durability
100,000
Protection
Phase Loss, Phase Reversal, Voltage Unbalance, Undervoltage u0026 Overvoltage
Minimum/Maximum Voltage
156-550V (PMDU); 77-152V (PMD120): 345-660V (PMD575), all 50/60Hz.+5%
Life
Mechanical: 10,000,000 operations, Full Load: 100,000 operations
Temperature
-28°to 65°C (-18°to 149°F)
Monitored Voltage
460-600V AC
Enclosure Style
Mounts on 35mm DIN rail or panel mounted, DIN-Rail
Output Contacts
10A @ 277V AC/30V DC; 1/2HP @ 120/240V AC (N.O.),1/3HP @ 120/240V AC (N.C.), B300 Pilot Duty, R300 (N.O.)
Load (Burden)
Less than 40 VA
Configuration / Contact Rating
DPDT. 10A @ 277V AC/30V DC; 1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
Reset
As standard, the PMD Series relays are in the Automatic Reset mode. However, they can be set in the Manual Reset mode by connecting an external N.C. switch across terminals 4 and 5. Upon application of line voltage, the PMD Series will go into Manual Reset mode if it recognizes a closure across terminals 4 and 5. After a fault clears, the relay will not reset until the N.C. switch is opened.
Country of Origin (subject to change)
United States
