| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1 1/4 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 5 in |
| Mounting Surface to Shaft Center | 1 7/8 in |
| Series | MP |
| Number of Bolts | 2 |
| Dimension G | 11/16 in |
| Dimension H | 3 13/16 in |
| Dynamic Load Capacity | 5,782 lb |
| Bolt Size | 1/2 in |
| Dimension D | 2 1/4 in |
| Locking Type | Set Screw |
| Dimension F | 9/16 in |
| Static Load Capacity | 3,493 lb |
| Item | Pillow Block Bearing |
| Dimension J | 1 11/16 in |
| Dimension E | 1 in |
| Temp. Range | -20 Degrees to 220 Degrees F |
| Finish | black oxide |
| Overall Height | 3.812 in |
| Dimension C | 4-1/2 in to 5-1/2 in |
| Housing Material | Cast Iron |
| Overall Width | 2.25 in |
| Dimension A | 1 7/8 in |
| Dimension B | 6 7/8 in |
| Overall Length | 6.875 in |
| Dimension L | 1 55/64 in |
| Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
| Lubricant Material | NGLI #2 Equivalent |
| Mount Hole Center-to-Center Length | 5.5 in |
| Base Height | 0.69 in |
| Mounting Bolt Size | 1/2 in |
| Housing Material Finish | Black Oxide |
| Maximum Misalignment Angle | 2 Degrees |
| Maximum Temperature | 220 Degrees F |
| Bore Type | Cylindrical |
| Closure | Double Sealed |
| Mount Type | Bolt-Through |
| Static Radial Load Capacity | 3,493 lbf |
| Bore Diameter | 1 1/4 in |
| Base Width | 2.25 in |
| Seal Material | Felt |
| Dynamic Radial Load Capacity | 5,782 lbf |
| Bearing Material Grade | 52100 |
| Number of Mount Holes | 2 |
| System of Measurement | Inch |
| Minimum Temperature | -20 Degrees F |
| Center Height | 1.875 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 1-1/4" Bore, SEALMASTER, Mfr# MP-20
$249,99
-$7.5 / ea
with subscription
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.69 in, Base Width 2.25 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/4 in, Bore Type Cylindrical, Center Height 1.875 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 5.5 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 3.812 in
9999 in stock
Must order in multiples of 1
Subtotal:
$249.99
You must be logged in to post a review.
Reviews
There are no reviews yet.