| Bearing Insert Type | Radial Ball |
| Bore Dia. | 3 7/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 10 31/32 in |
| Mounting Surface to Shaft Center | 4 in |
| Series | Medium Duty |
| Number of Bolts | 2 |
| Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
| Temp. Range | -20 Degrees to 250 Degrees F |
| Dynamic Load Capacity | 24,500 lb |
| Overall Width | 4.374 in |
| Dimension H1 | 1 5/16 in |
| Dimension L | 14 in |
| Housing Material | Cast Iron |
| Dimension J | 10 31/32 in |
| Dimension A | 4 3/8 in |
| Static Load Capacity | 18,400 lb |
| Bolt Size | 3/4 in |
| Locking Type | Set Screw |
| Overall Height | 8 in |
| Dimension D | 3 7/16 in |
| Overall Length | 14 in |
| Item | Pillow Block Bearing |
| Dimension H | 4 in |
| Dimension H2 | 8 in |
| Dimension S | 1 11/16 in |
| Dimension B | 4 3/32 in |
| Dimension N | 15/16 in |
| Finish | Painted |
| Center Height | 3 63/64 in |
| System of Measurement | Inch |
| Lubricant Material | NLGI #3 Equivalent |
| Bearing Material Grade | 52100 |
| Static Radial Load Capacity | 18,434 lbf |
| Seal Type | Contact |
| Maximum Temperature | 250 Degrees F |
| Mount Type | Bolt-Through |
| Mounting Bolt Size | 3/4 in |
| Closure | Open |
| Minimum Temperature | -40 Degrees F |
| Housing Material Finish | Black Oxide |
| Base Width | 4.374 in |
| Bore Diameter | 3 7/16 in |
| Bore Type | Cylindrical |
| Mount Hole Center-to-Center Length | 10 61/64 in |
| Mount Hole Size | 0.937 in x 2 in |
| Maximum Speed | 1,300 RPM |
| Features | Light Duty |
| Seal Material | Nitrile Rubber |
| Number of Mount Holes | 2 |
| Inner Ring Width | 4.094 in |
| Dynamic Radial Load Capacity | 24,504 lbf |
| Base Height | 1.311 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 3-7/16" Bore, NTN, Mfr# UCPX-3.7/16M
$519,99
-$15.6 / ea
with subscription
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.311 in, Base Width 4.374 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 3 7/16 in, Bore Type Cylindrical, Center Height 3 63/64 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 1,300 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 10 61/64 in, Mount Type Bolt-Through, Number of Mount Holes 2
9999 in stock
Must order in multiples of 1
Subtotal:
$519.99
You must be logged in to post a review.
Reviews
There are no reviews yet.