Bearing Insert Type | Radial Ball |
Bore Dia. | 5/8 in |
Shaft Locking Type | Set Screws |
Bearing Housing Material Type | Cast Iron |
Bearing Insert Material | Alloy Steel |
Bolt Hole Center-to-Center | 3 3/4 in |
Mounting Surface to Shaft Center | 1 1/16 in |
Series | NPL |
Number of Bolts | 2 |
Dimension A | 1 1/16 in |
Dimension E | 1 7/16 in |
Item | Pillow Block Bearing |
Dimension D | 1 1/2 in |
Temp. Range | -20 Degrees to 220 Degrees F |
Dynamic Load Capacity | 2,611 lb |
Bearing Lubrication | Sealmaster GoldPlex-HP or NLGI #2 Equivalent |
Overall Width | 1.5 in |
Static Load Capacity | 1,444 lb |
Dimension L | 1 3/16 in |
Housing Material | Cast Iron |
Dimension J | 1 7/32 in |
Dimension C | 3-3/8 in to 4-1/8 in |
Dimension F | 7/16 in |
Overall Length | 5 in |
Overall Height | 2.312 in |
Dimension H | 2 5/16 in |
Finish | black oxide |
Dimension G | 3/8 in |
Locking Type | Set Screw |
Dimension B | 5 in |
Bolt Size | 3/8 in |
Bore Type | Cylindrical |
Center Height | 1 1/16 in |
Lubricant Material | NGLI #2 Equivalent |
Mounting Bolt Size | 3/8 in |
Static Radial Load Capacity | 1,444 lbf |
Base Width | 1.5 in |
System of Measurement | Inch |
Closure | Double Sealed |
Base Height | 0.38 in |
Maximum Misalignment Angle | 2 Degrees |
Mount Hole Center-to-Center Length | 4 1/8 in |
Number of Mount Holes | 2 |
Minimum Temperature | -20 Degrees F |
Housing Material Finish | Black Oxide |
Maximum Temperature | 220 Degrees F |
Bearing Material Grade | 52100 |
Dynamic Radial Load Capacity | 2,611 lbf |
Seal Material | Felt |
Bore Diameter | 5/8 in |
Mount Type | Bolt-Through |
Country of Origin (subject to change) | Multiple |
Package Quantity | 1 |
Pillow Block Bearing, Ball, 5/8" Bore, SEALMASTER, Mfr# NPL-10
$109,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 0.38 in, Base Width 1.5 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 5/8 in, Bore Type Cylindrical, Center Height 1 1/16 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 220 Degrees F, Minimum Temperature -20 Degrees F, Mount Hole Center-to-Center Length 4 1/8 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 2.312 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.