Static Load Capacity
76,400 lb
Temp. Range
-40 Degrees to 250 Degrees F
Dynamic Load Capacity
56,900 lb
Includes
Non-Expansion M2000 Spherical Roller Bearing
Bearing Housing Material Type
Cast Iron
Bearing Insert Type
Spherical Roller
Bolt Hole Center-to-Center
12 in
Mounting Surface to Shaft Center
3 3/4 in
Bearing Lubrication
Lithium Complex Grease
Shaft Locking Type
Set Screws
Bearing Insert Material
Alloy Steel
Housing Material
Cast Iron
Maximum Misalignment Angle
5.5 Degrees
Minimum Temperature
-40 Degrees F
Lubricant Material
Lithium Grease
Maximum Temperature
250 Degrees F
Mount Hole Center-to-Center Length
10 in
Included Bearing
Non-Expansion M2000 Spherical Roller
Bearing Material Grade
52100
Dynamic Axial Load Capacity
56,900 lbf
Application
Air Handling, Conveying, Food Processing, Paper and Forestry, Screening
System of Measurement
Inch
Static Radial Load Capacity
76,400 lbf
Features
+/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity
Mount Hole Center-to-Center Width
2 in
Country of Origin (subject to change)
United States
