| Item | Linear Pillow Block Bearing |
| Bore Dia. (In.) | 1.25 in |
| Material | Stainless Steel/Polymer Cage |
| Retaining Ring | Eaton |
| Mounting Hole Dia. (mm) | 0.21875 in |
| Dimension H | #10 |
| Mounting Hole Dia. (In.) | 0.2188 in |
| Self-Alignment | Not Self-Aligning |
| Lubrication | No Lubrication System |
| Finish | Standard Anodized |
| Temp. Range (F) | 0 - 176 |
| Color | Silver/Black |
| Locking Type | Roll Pin |
| Dimension P | 2.122 in |
| Body Width (In.) | 3 in |
| Dimension F | 2 in |
| Overall Height (In.) | 2.5 in |
| Slot Width (In.) | 0.625 in |
| Overall Width (In.) | 4 in |
| Dimension G | 3 in |
| Dimension E | 3.5 in |
| Steady State Speed | 7 fps |
| Static Load Capacity (Lb.) | 616 lb |
| For Use With | Support and Feather Rails |
| Bearing Type | Ball |
| Dimension K | 2.5 in |
| Dimension O | 0.068 in |
| Dimension J | 0.438 in |
| Bolt Size | #10 |
| Dynamic Load Capacity (Lb.) | 353 lb |
| Dynamic Load Capacity (N) | 353 lbf |
| Dimension A | 1.5 in |
| Flange Thickness (In.) | 0.437 in |
| Overall Length (In.) | 3.375 in |
| Static Load Capacity (N) | 616 lbf |
| Dimension B | 4 in |
| Dimension M (In.) | 2.625 in |
| Mounting Surface to Shaft Center (In.) | 1.5 in |
| Dimension C | 3.38 in |
| Type | Open Pillow Block |
| Dimension H1 | 7/32 |
| Brand & Series | DAYTON |
| Operating Temperature Range | -4 Degrees F to 176 Degrees F |
| Dimension a | 1.5 in |
| Inside Dia. | 1 1/4 in |
| Flange Thickness | 0.437 in |
| Pillow Block Design | Not Adjustable |
| Length (In.) | 3 3/8 in |
| System of Measurement | Inch |
| Minimum Operating Temperature | -4 Degrees F |
| Maximum Operating Temperature | 176 Degrees F |
| Series | Dayton |
| Flange Width | 4 in |
| Housing Style | Single |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block, 1.250 In Bore, 3.375 In L, DAYTON, Mfr# 2CNP1
$205,99
-$6.18 / ea
with subscription
Free shipping will be applied on orders over $50
Linear Pillow Block Bearing, Inside Dia. 1 1/4 in, Material Stainless Steel/Polymer Cage, Bearing Type Ball, Body Width (In.) 3 in, Bolt Size #10, Color Silver/Black, Dimension a 1.5 in, Dimension A (In.) -, Dimension B 4 in, Dimension B (In.) -, Dimension C 3.38 in, Dimension C (In.) -, Dimension D (In.) -, Dimension E 3.5 in, Dimension E (In.) -, Dimension F 2 in
9999 in stock
Must order in multiples of 1
Subtotal:
$205.99
You must be logged in to post a review.
Reviews
There are no reviews yet.