| Item | Linear Pillow Block Bearing |
| Bore Dia. (In.) | 2 in |
| Material | Stainless Steel/Polymer Cage |
| Dynamic Load Capacity (N) | 1,718 lbf |
| Bearing Type | Ball |
| Body Width (In.) | 4.5 in |
| Dimension K | 3.625 in |
| Flange Thickness (In.) | 0.625 in |
| Dimension C | 10 in |
| Dimension R | 1 in |
| Dimension P | 3.182 in |
| Slot Width (In.) | 1 in |
| Dimension E | 5.25 in |
| Bolt Size | 3/8 in |
| Locking Type | Roll Pin |
| Dimension F | 8.25 in |
| Overall Height (In.) | 3.625 in |
| Type | Open Pillow Block |
| Color | Silver/Black |
| For Use With | Support and Feather Rails |
| Overall Width (In.) | 6 in |
| Dimension H1 | 13/32 |
| Static Load Capacity (N) | 3,570 lbf |
| Lubrication | No Lubrication System |
| Dimension G | 4.5 in |
| Dimension J | 0.625 in |
| Overall Length (In.) | 10 in |
| Dynamic Load Capacity (Lb.) | 1,718 lb |
| Mounting Hole Dia. (mm) | 0.40625 in |
| Steady State Speed | 7 fps |
| Dimension O | 0.103 in |
| Mounting Hole Dia. (In.) | 0.4063 in |
| Finish | Standard Anodized |
| Dimension H | 0.375 in |
| Dimension M (In.) | 4 in |
| Temp. Range (F) | 0 - 176 |
| Dimension A | 2.125 in |
| Static Load Capacity (Lb.) | 3,570 lb |
| Dimension S | 4.688 in |
| Self-Alignment | Not Self-Aligning |
| Dimension B | 6 in |
| Retaining Ring | Eaton |
| Dimension F1 | 3.25 in |
| Mounting Surface to Shaft Center (In.) | 2.125 in |
| Flange Thickness | 0.625 in |
| Brand & Series | DAYTON |
| Inside Dia. | 2 in |
| Length (In.) | 10 in |
| System of Measurement | Inch |
| Maximum Operating Temperature | 176 Degrees F |
| Housing Style | Twin |
| Dimension a | 2.125 in |
| Minimum Operating Temperature | -4 Degrees F |
| Pillow Block Design | Not Adjustable |
| Series | Dayton |
| Operating Temperature Range | -4 Degrees F to 176 Degrees F |
| Flange Width | 6 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block, 2.000 In Bore, 10.000 In L, DAYTON, Mfr# 2CNR8
$626,99
Free shipping will be applied on orders over $50
Linear Pillow Block Bearing, Inside Dia. 2 in, Material Stainless Steel/Polymer Cage, Bearing Type Ball, Body Width (In.) 4.5 in, Bolt Size 3/8 in, Color Silver/Black, Dimension a 2.125 in, Dimension A (In.) -, Dimension B 6 in, Dimension B (In.) -, Dimension C 10 in, Dimension C (In.) -, Dimension D (In.) -, Dimension E 5.25 in, Dimension E (In.) -, Dimension F 8.25 in, Dimension F1 3.25 in
0 in stock
Must order in multiples of 1
Subtotal:
$626.99
You must be logged in to post a review.
Reviews
There are no reviews yet.