Item | Pin and Sleeve Receptacle with GFCI |
Voltage | 120/240V AC |
Number of Wires | 2 |
Number of Poles | 3 |
HP | 1 hp |
Amps | 20 A |
Material | Copper-Free Aluminum Cover, Malleable Iron Body |
Standards | UL Listed |
Hub Size | 3/4 in |
Hub Style | Feed-Thru |
Finish | Epoxy Powder Coated |
Mounting Box | 2-Gang |
Screws | Captive Hex Head Slotted, Stainless Steel |
Connection Orientation | 60 Degrees Elbow |
Phase | Single |
GFCI | Yes |
Hub Diameter | 0.75 in |
Mounting Box Hub Type | Feed Through |
Includes Mounting Hardware | Yes |
Hazardous Location Specification | Class I, Div 1 and 2, Group C, D |
IP Rating | Not Rated |
Hub Type | Feed Through |
Contact Material | Copper |
Grounding Style | Not Applicable |
Current Rating | 20 A |
Voltage Rating | 125 to 250V AC, 18V DC |
Horsepower Rating | 1 hp |
Reverse Service | No |
Resistance Properties | Corrosion Resistant |
Flange Height | Not Applicable |
Housing Color | Gray |
Power Indicating Light | No |
Flange Width | Not Applicable |
UL 94 Flammability Rating | Not Rated |
Mounting Box Entry | Feed Through |
For Maximum Cable Diameter | 0.639 in |
Housing Material Type | Metallic |
Shrouded | Yes |
For Minimum Cable Diameter | 0.538 in |
Face Diameter | 2.63 in |
Housing Material Finish | Epoxy Powder Coated |
Number of Gangs | 2 |
Wire Connection Type | Spring Clamp Terminals |
Cap Type | Spring-Loaded Cap |
Number of Poles & Wires | 3 Pole / 2 Wire |
Housing Material | Malleable Iron |
Flange Diameter | Not Applicable |
Market | Industrial |
Hub Type Stand-In | 60 Degrees Elbow / Feed Through / Feed Through |
With GFCI | With GFCI |
NEMA Enclosure Rating | Not Rated |
Minimum Wire Size | Not Applicable |
Flange Type | Non-Flanged |
Grounding | Grounded |
Switch Rated | Not Applicable |
Insulation Material | Fiberglass-Reinforced Polyester |
Features | Delayed Action Construction: Insert Plug Partially Rotate Slide on Front of Receptacle and Insert Plug Fully |
Maximum Wire Size | Not Applicable |
Amperage | 20 |
Mounting Box Entries | Dead-End or Feed-Thru |
Materials and Finishes | Receptacle cover and CPP plug is copperfree (4/10 of 1% max.) aluminum with epoxy powder coat. Mounting box is malleable iron with triple-coat. Insulating blocks are fiberglass reinforced polyester. |
Plug Cable Diameter | .538- .639 |
Horsepower Ratings | 1 |
Hazardous Area Classification | Class I, Division 1 and 2, Groups C, D |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
2W 3P 20A Hazardous Pin & Sleeve Receptacle 120/240VAC, APPLETON ELECTRIC, Mfr# CPS152-212GFI
$1504,99
Free shipping will be applied on orders over $50
Pin and Sleeve Receptacle with GFCI, Current Rating 20 A, Flange Type Non-Flanged, Grounding Style Not Applicable, Hazardous Location Specification Class I, Div 1 and 2, Group C, D, IP Rating Not Rated, NEMA Enclosure Rating Not Rated, Number of Gangs 2, Number of Poles 3, Number of Wires 2, Phase Single, Shrouded Yes, Voltage Rating 125 to 250V AC, 18V DC, Cap Type Spring-Loaded Cap, Connection Orientation 60 Degrees Elbow, Face Diameter 2.63 in, Flange Diameter Not Applicable
9999 in stock
Must order in multiples of 1
Subtotal:
$1504.99
You must be logged in to post a review.
Reviews
There are no reviews yet.