Item | Plasma Cutter |
Rated Output | 27 A |
Input Voltage | 110 V AC, 115 V AC, 120 V AC, 220 V AC, 230 V AC, 240 V AC |
Cutting Capacity (In.) | 5/8 in |
Cable Length (Ft.) | 12 |
Series | AirForce 27i |
Input (Amps) | 13.9/28.8A |
PSI | 90-120 |
Includes | 12 ft Work Cable with Clamp, Consumables Kit, XT30R Hand-Held Torch with 12 ft Cable |
Overall Height (In.) | 11.25 in |
Application | Plasma Cutting |
Overall Depth (In.) | 14.25 in |
OCV | 400V DC |
Design | Inverter |
Overall Width (In.) | 8 1/4 in |
Duty Cycle | 120V - 20%, 240V - 35% |
Welding Processes | Plasma Cutting |
Maximum Output Current | 27 A |
Open Circuit Voltage | 400 V DC |
Rated Output at Duty Cycle | 20 A @ 60%, 27 A @ 35% |
Color | White |
Plasma Cutting Minimum Output Current | 14 A |
Overall Depth | 14.25 in |
Plasma Torch Type | Handheld |
Ground Cord Length | 12 ft |
Features | Automatic Gouging, Compatible With Engine-Driven Welders, Internal Gas/Air Filter and Regulator, LVC Line Voltage Compensation, Postflow Cooling Circuit, Power Factor Correction (PFC) Circuitry, Starts Without High Frequency |
Maximum Pressure - Air Compressor | 90 psi |
Weight | 19 lb |
Plasma Torch | 12 ft Handheld |
For Minimum Material Thickness | 1/8 in |
Cutting Cable Length | 12 ft |
Input Frequency | 50/60 Hz |
Overall Width | 8.25 in |
Power Cord Length | 10 ft |
For Material Type | Mild Steel |
Plug Type | 5-15P, 6-50P |
Plasma Cutter Type | Plasma Cutter |
For Maximum Material Thickness | 3/8 in |
Input Voltage (Nominal) | 120V |
Phase | Single-Phase |
Required Air Flow | 5 cfm |
Max. Amperage Range | Less than 50 A |
Plasma Cutter Model | 500575 |
Max. Input Current | 20 A @ 120V DC (Single-Phase) |
Cutting Configuration | Plasma Cutting |
Plasma Cutting Output @ Duty Cycle | 20 A @ 88V DC, 60% (120 V), 27 A @ 92V DC, 35% (120 V), 30 A @ 92V DC, 40% (240 V) |
Overall Height | 11.25 in |
Standards | CSA |
Process | Plasma Cutting |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Plasma Cutter, 240V - 13.9A, 120V - 28.8A, HOBART WELDING PRODUCTS, Mfr# 500575
$2212,99
-$2212.99 / ea
with subscription
Free shipping will be applied on orders over $50
Plasma Cutter, Cutting Configuration Plasma Cutting, For Material Type Mild Steel, For Maximum Material Thickness 3/8 in, For Minimum Material Thickness 1/8 in, Input Frequency 50/60 Hz, Input Voltage 110 V AC, 115 V AC, 120 V AC, 220 V AC, 230 V AC, 240 V AC, Max. Input Current 20 A @ 120V DC (Single-Phase), Open Circuit Voltage 400 V DC, Phase Single-Phase, Plasma Cutter Model 500575, Maximum Output Current 27 A, Plasma Cutting Minimum Output Current 14 A
9999 in stock
Must order in multiples of 1
Subtotal:
$2212.99
You must be logged in to post a review.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.