| Item | Plastec Blower |
| Type | Direct Drive Forward Curve |
| Wheel Dia. (In.) | 10 in |
| Voltage | 230/460 |
| Motor HP | 3/4 hp |
| Motor Type | General Duty, Three Phase |
| Height (In.) | 30.18 in |
| CFM @ 0.125-In. SP | 600 |
| Blower RPM | 1,725 RPM |
| CFM @ 1.000-In. SP | 500 |
| CFM @ 0.200-In. SP | 700 |
| Width (In.) | 18.25 in |
| CFM @ 2.000-In. SP | 400 |
| CFM @ 1.500-In. SP | 1000 |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| CFM @ 1.250-In. SP | 800 |
| Wheel Width (In.) | 5.5 in |
| Rotation | CCW |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| Outlet Dia. (In.) | 7.67 in |
| Depth (In.) | 18.59 in |
| CFM @ 0.250-In. SP | 800 |
| dBA @ 5 Feet | 58 dBA |
| Inlet Dia. (In.) | 7.87 in |
| Wheel Material | Plastic |
| Wheel Type | Forward-Curved |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Housing Finish | Polypropylene |
| Full Load Amps | 2.53/1.26 |
| Phase | 3 |
| Hz | 50/60 Hz |
| Motor RPM | 1,725 RPM |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Includes | Motor Mounting Base |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Shaft Dia. (In.) | 14 mm |
| Motor Frame | 71 |
| Housing Material | Plastic |
| Airflow @ 2.000 in SP | 400 cfm |
| Outlet Size | 7 5/8 in diameter |
| Motor Speed | 1,725 RPM |
| Housing Width | 18 1/4 in |
| Standards | AMCA Certified, CSA Certified, UL Listed |
| Flange Type_broad | Outlet |
| Airflow @ Static Pressures | 600 cfm @ 0.125 in SP / 800 cfm @ 0.250 in SP / 500 cfm @ 1.000 in SP / 1,000 cfm @ 1.500 in SP |
| Inlet Type | Single-Inlet |
| Overall Width | 18 1/4 in |
| Airflow @ 1.500 in SP | 1,000 cfm |
| Airflow @ 1.250 in SP | 800 cfm |
| Minimum Fan Speed | 1,725 RPM |
| Outlet Shape | Round |
| Corrosion Resistant | Yes |
| Flange Size | Not Applicable |
| Overall Depth | 18 9/16 in |
| Assembly | Assembled |
| Maximum Static Pressure | 2 1/4 in wc |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Outlet Height | Not Applicable |
| Motor Horsepower | 3/4 hp |
| Airflow @ 0.250 in SP | 800 cfm |
| Frequency | 50/60 Hz |
| Nameplate Voltage | 230/460V AC |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
| Thermal Overload Protection | Yes |
| Current | 2.53/1.26 A |
| Shaft Diameter | 14 mm |
| Sound Level | 58 dBA @ 5 ft |
| Airflow @ 0.125 in SP | 600 cfm |
| Outlet Shape_broad | Round |
| Outlet Diameter | 7 5/8 in |
| Housing Height | 30 1/8 in |
| Number of Discharge Positions | 2 |
| Inlet Diameter | 7 13/16 in |
| Airflow @ 1.500 in SP Range | 1000 to 1999 cfm |
| Motor Frame Designation | 71 |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
| Maximum Ambient Temperature | -13 Degrees F |
| Includes Drive Package | Yes |
| Includes Motor | Yes |
| Number of Inlets | 1 |
| Maximum Fan Speed | 1,725 RPM |
| Mount Type | Motor Mount |
| Motor Enclosure Design_Table | Totally Enclosed Motor |
| Flange Type | Non-Flanged |
| Nominal Voltage | 230/460V AC |
| Mounting Orientation | Multiposition |
| Includes Mounting Hardware | Yes |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Overall Height | 30 1/8 in |
| Minimum Ambient Temperature | -40 Degrees C |
| Drive Type | Direct Drive |
| Wheel Dimensions | 10 in Dia. x 5 1/2 in W |
| Material | Plastic Wheel & Plastic Housing |
| Wheel Diameter | 10 in |
| For Fan Speed (Dependent on Motor) | 1,725 RPM to 1,725 RPM |
| Airflow @ 1.000 in SP | 500 cfm |
| Outlet Width | Not Applicable |
| Wheel Width | 5 1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Plastec Blower, Forward Curve, 10 in, PLASTEC, Mfr# P25ST4P075
$2404,99
Free shipping will be applied on orders over $50
Plastec Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 10 in, Airflow @ 0.125 in SP 600 cfm, Airflow @ 0.250 in SP 800 cfm, Airflow @ 1.000 in SP 500 cfm, Airflow @ 1.250 in SP 800 cfm, Airflow @ 1.500 in SP 1,000 cfm, Airflow @ 2.000 in SP 400 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.