| Item | Plastec Blower |
| Type | Direct Drive Forward Curve |
| Wheel Dia. (In.) | 6 in |
| Voltage | 115/230 |
| Motor HP | 1/2 hp |
| Motor Type | General Duty, Single Phase |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| CFM @ 0.200-In. SP | 375 |
| Motor RPM | 3,450 RPM |
| Motor Frame | 71 |
| Wheel Type | Forward-Curved |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| CFM @ 1.250-In. SP | 500 |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Width (In.) | 13.88 in |
| CFM @ 0.250-In. SP | 450 |
| CFM @ 0.125-In. SP | 350 |
| CFM @ 0.500-In. SP | 500 |
| dBA @ 5 Feet | 72 dBA |
| Blower RPM | 3,450 RPM |
| Outlet Dia. (In.) | 4.47 in |
| Depth (In.) | 17.04 in |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| Height (In.) | 21.93 in |
| CFM @ 1.000-In. SP | 500 |
| Includes | Motor Mounting Base |
| CFM @ 1.500-In. SP | 425 |
| Housing Material | Plastic |
| Phase | 1 |
| Full Load Amps | 4.9/2.45 |
| Rotation | CCW |
| CFM @ 2.000-In. SP | 400 |
| Wheel Material | Plastic |
| CFM @ 2.500-In. SP | 100 |
| Inlet Dia. (In.) | 4.92 in |
| Wheel Width (In.) | 3.38 in |
| Hz | 60 Hz |
| Shaft Dia. (In.) | 14 mm |
| Housing Finish | Polypropylene |
| CFM @ 0.750-In. SP | 500 |
| Inlet Type | Single-Inlet |
| Airflow @ 0.500 in SP | 500 cfm |
| Shaft Diameter | 14 mm |
| Includes Motor | Yes |
| Corrosion Resistant | Yes |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Maximum Static Pressure | 2 1/2 in wc |
| Motor Frame Designation | 71 |
| Airflow @ 1.250 in SP | 500 cfm |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
| Airflow @ 0.250 in SP | 450 cfm |
| Airflow @ 2.500 in SP | 100 cfm |
| Flange Type | Non-Flanged |
| Airflow @ 2.500 in SP Range | 0 to 999 cfm |
| Mount Type | Motor Mount |
| Airflow @ 0.125 in SP | 350 cfm |
| Number of Discharge Positions | 2 |
| Mounting Orientation | Multiposition |
| Maximum Fan Speed | 3,450 RPM |
| Outlet Width | Not Applicable |
| Wheel Diameter | 6 in |
| Wheel Dimensions | 6 in Dia. x 3 3/8 in W |
| Outlet Shape | Round |
| Outlet Diameter | 4 7/16 in |
| Standards | AMCA Certified, CSA Certified, UL Listed |
| Inlet Diameter | 4 7/8 in |
| Outlet Size | 4 3/8 in diameter |
| Includes Mounting Hardware | Yes |
| Airflow @ Static Pressures | 350 cfm @ 0.125 in SP / 450 cfm @ 0.250 in SP / 500 cfm @ 1.000 in SP / 425 cfm @ 1.500 in SP |
| Airflow @ 1.000 in SP | 500 cfm |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
| Thermal Overload Protection | Yes |
| Motor Horsepower | 1/2 hp |
| Airflow @ 1.500 in SP Range | 0 to 999 cfm |
| Assembly | Assembled |
| Material | Plastic Wheel & Plastic Housing |
| Sound Level | 72 dBA @ 5 ft |
| Current | 4.9/2.45 A |
| Includes Drive Package | Yes |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Outlet Height | Not Applicable |
| Overall Height | 21 7/8 in |
| Airflow @ 2.000 in SP | 400 cfm |
| Nominal Voltage | 115/230V AC |
| For Fan Speed (Dependent on Motor) | 3,450 RPM to 3,450 RPM |
| Housing Height | 21 7/8 in |
| Wheel Width | 3 3/8 in |
| Housing Width | 13 7/8 in |
| Minimum Fan Speed | 3,450 RPM |
| Airflow @ 0.500 in SP Range | 0 to 999 cfm |
| Flange Size | Not Applicable |
| Airflow @ 1.500 in SP | 425 cfm |
| Drive Type | Direct Drive |
| Frequency | 60 Hz |
| Minimum Ambient Temperature | -40 Degrees C |
| Outlet Shape_broad | Round |
| Overall Depth | 17 in |
| Number of Inlets | 1 |
| Motor Speed | 3,450 RPM |
| Motor Enclosure Design_Table | Totally Enclosed Motor |
| Flange Type_broad | Outlet |
| Maximum Ambient Temperature | -13 Degrees F |
| Nameplate Voltage | 115/230V AC |
| Overall Width | 13 7/8 in |
| Airflow @ 0.750 in SP | 500 cfm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Plastec Blower, Forward Curve, 6 in, PLASTEC, Mfr# P15SS2P050
$1690,99
Free shipping will be applied on orders over $50
Plastec Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 6 in, Airflow @ 0.125 in SP 350 cfm, Airflow @ 0.250 in SP 450 cfm, Airflow @ 0.500 in SP 500 cfm, Airflow @ 0.750 in SP 500 cfm, Airflow @ 1.000 in SP 500 cfm, Airflow @ 1.250 in SP 500 cfm, Airflow @ 1.500 in SP 425 cfm, Airflow @ 2.000 in SP 400 cfm, Airflow @ 2.500 in SP 100 cfm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.