| Item | Beveling Machine |
| Max. Bevel | 5/32 in |
| Bevel Angle | 45 Degrees |
| Number of Inserts | 2 |
| HP | 1.25 hp |
| Voltage | 110 to 120V |
| Corded/Cordless | Corded |
| Amps | 8.0 A |
| Features | Maximum 5/32-in chamfer height and 1/8-in radius in steel, Removes rust and burrs, Ideal preparation for powder coatings or paint coatings, Patented one-touch controller for tool-free adjustment of cutting depth in 0.1mm steps, Uses standard carbide indexable inserts, Ball-bearing stationary seal ring for working in tubes and in curves, Guide stop for a uniform finish and high quality of the surface when processing straight sheets, Metabo Long-Life motor with patented dust protection for long service life, Electronic speed stabilization for almost constant speed under load, Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly, Electronic overload protection for long service life, Slim design for ideal handling |
| Phase | Single-Phase |
| Hz | 50/60 |
| Corded/Banded | Corded |
| No Load RPM | 11,500 RPM |
| Radius Inserts for Rounding | Yes |
| Includes | Guide Fence |
| Tool Weight | 5.5 lb |
| Maximum Speed | 11,500 RPM |
| Current | 8 A |
| Compatible Workpiece Shape | Plate |
| Minimum Workpiece Thickness | 7/64 in |
| Kit Contents | (2) Carbide Indexable Inserts 45 Degree Chamfer (DCMT 11 T 304), (2) Carbide Indexable Inserts Radius R2, (2) Carbide Indexable Inserts Radius R3, Bow Type Handle, Guide Stop Screwdriver for Torx Screws 15, MetaLoc Case |
| Number of Cutting Sides | Single-Sided |
| Feed Type | Hand Fed |
| Beveler Type | Portable |
| Maximum Bevel Width | 5/32 in |
| Cord Length | 13 ft |
| Nominal Voltage | 115V |
| Horsepower | 1.25 hp |
| Minimum Speed | 4,500 RPM |
| Power Source | Corded |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |
Portable Beveling Machine, 4mm Size, METABO, Mfr# KFM 9-3 RF
$1455,99
Free shipping will be applied on orders over $50
Beveling Machine, Beveler Type Portable, Power Source Corded, Voltage 110 to 120V, Phase Single-Phase, Current 8 A, Horsepower 1.25 hp, Bevel Angle 45 Degrees , Compatible Workpiece Shape Plate, Maximum Bevel Width 5/32 in, Minimum Workpiece Thickness 7/64 in, Number of Inserts 2, Maximum Speed 11,500 RPM, Feed Type Hand Fed, Number of Cutting Sides Single-Sided
9999 in stock
Must order in multiples of 1
Subtotal:
$1455.99
You must be logged in to post a review.
Reviews
There are no reviews yet.