Item | Pressure Booster Pump |
For Use With Potable Systems | Yes |
Intake Size | 1 in |
Impeller Material | Stainless Steel |
Case Pressure (Maximum) | 300 psi |
Includes Controller | Yes |
Maximum Feet of Head | 115 ft |
Cord Length | 15 ft |
Best Efficiency Pressure | Not Applicable |
Motor Ambient Temperature (Minimum) | 5 Degrees F |
System Pressure (Maximum) | 100 psi |
Solid Diameter (Maximum) | Not Applicable |
Overall Width | 6.5 in |
Compatible with Media Type | Acids, Corrosives Chemicals, Excessive Dust, Salt |
Pressure Boost (Minimum) | 15 psi |
Phase | Single |
Nameplate Voltage | 230V AC |
Motor Ambient Temperature (Maximum) | 122 Degrees F |
Seal Material | Carbon, EPR, Silicon Carbide |
Minimum Flow Rate | 75 gpm |
Frequency | 60 Hz |
Horsepower | 1 hp |
Discharge Type | NPT |
Series | e-HM |
Pump Housing Material | Stainless Steel |
Tank Type | Includes Pressure Tank |
Shut Off Pressure (Maximum) | 80 psi |
Overall Length | 11 in |
Maximum Flow Rate | 290 gpm |
Tank Capacity | 5 gal |
Intake Type | NPT |
Pressure Switch Setting | 20-85 |
Maximum RPM | 3,600 RPM |
Impeller Design | Closed |
Compatible Intake Pipe Size | 1 1/4 in |
Standards | NSF 372, NSF 61, UL778 Recognized |
Pressure Boost (Maximum) | 45 psi |
Discharge Rotation | Not Applicable |
Electrical Connection Type | Hardwired |
Thermal Overload Protection | Yes |
Suction Lift (Maximum) | 20 ft |
Motor Enclosure | Totally Enclosed Fan Cooled |
Discharge Flange Size | Not Applicable |
Seal Type | Carbon, EPR, Silicon Carbide |
Amps | 20 mA |
Overall Height | 21 in |
Compatible Discharge Pipe Size | 1 in |
Maximum Media Temperature | 212 Degrees F |
Wetted Material | Stainless steel |
Mounting Orientation | Horizontal |
Number of Stages | 3 |
Pumping Application | Irrigation Systems |
Feet of Head (Minimum) | 7 ft |
Manufacturer Warranty Length | 1 yr |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Pressure Booster, 230V AC, 115 ft, 5 gal, GOULDS WATER TECHNOLOGY, Mfr# 1AB35HME03
$3523,99
Free shipping will be applied on orders over $50
Pressure Booster Pump, Phase Single, Pump Housing Material Stainless Steel, Horsepower 1 hp, Nameplate Voltage 230V AC, Maximum Flow Rate 290 gpm, Minimum Flow Rate 75 gpm, Maximum Feet of Head 115 ft, Pressure Boost (Maximum) 45 psi, Pressure Boost (Minimum) 15 psi, Tank Type Includes Pressure Tank, Tank Capacity 5 gal, Intake Type NPT, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Motor Enclosure Totally Enclosed Fan Cooled, Discharge Type NPT
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.