Differential Pressure Gauge Type | Differential Pressure Gauge |
Gauge Nominal Dial Size | 4 in |
Basic Gauge Case Material | Metal |
Differential Gauge Connection Type | FNPT |
Differential Gauge Connection Size | 1/8 in |
Gauge Connection Location | Back and Side |
Differential Pressure Range Units | in wc |
Differential Pressure Range Value | 0 to 10 |
Gauge Accuracy | +/-2% |
Gauge Primary Range Smallest Graduation | 0.2 |
Rated Total Pressure | -20 in Hg to 15 psi |
Scale Type | Pressure and Air Velocity |
Gauge Operating Temp. Range | 20 Degrees to 140 Degrees F |
Dial Material | Die Cast Aluminum |
Item | Differential Pressure Gauge |
Velocity Range | 2000 to 12,500 fpm |
Body Material | Die Cast Aluminum |
Differential Pressure Range | 0 to 10 in wc |
Manufacturers Warranty Length | 1 yr |
Includes | Instructions, Three Mounting Adapters with Screws, Two 1/8 in NPT Plugs, Two 1/8 in NPT to 3/16 in ID Rubber Tubing Adapters |
Standards | EU RoHS II |
Case Color | Gray |
Series | Magnehelic |
Non-Sparking | No |
Accuracy | +/-2.0% |
Process Connection Type | NPT |
Manufacturer Warranty Length | 5 yr |
Pointer Characteristics | Red Tipped Pointer of Heat Treated Aluminum Tubing is easy to see |
Removable Bezel | No |
Panel Mount Characteristics | 3 L Dia Holes on E Dia Bolt Circle |
Application - Max Pressure | For Low Operating Pressure |
Case Construction | Corrosion Resistant |
Pressure Gauge Type | Differential Pressure Gauge |
Air Velocity Range | 2,000 to 12,500 fpm |
Case Depth | 1.687 in |
Ambient Operating Temperature Range | 20 Degrees to 140 Degrees F |
Nominal Dial Size | 4 in |
Over-Pressure Limit | 1.72 bar |
Bezel Mounting Type | Flush |
Sensor Material | Silicone Rubber |
Includes Calibration Certificate | No |
Adjustable Set Points | No |
Compatible Process Media | Cleanroom |
Bolt Circle Diameter | 4.125 in |
Mounting Orientation | Upright Only |
Panel-Mountable | Yes |
(Hidden) max pressure differentiator | 80 psig x For High Operating Pressure |
Hazardous Location Rating | Not Rated |
Maximum Working Static Pressure | 80 psig |
Dial Color | White |
Gauge Case Material | Aluminum |
Housing Material | Die Cast Aluminum |
Sensor Type | Diaphragm |
IP/NEMA Rating | IP67 |
Accuracy Details | +/-2% (-HA model +/-1) of FS ( +/-3% (-HA +/-1.5%) on -0, -100PA, -125PA, -10MM and +/-4% (-HA +/-2%) on -00, -60PA, -6MM ranges), throughout range at 70 Degrees F (21.1 Degrees C). |
Bezel Material | Die Cast Aluminum |
Max Pressure Application | For Low Operating Pressure |
Brand and Series | DWYER 2000 Magnehelic |
Process Connection Size | 1/8 in |
Pressure Range | 0 to 10 in wc |
Mounting Hardware Included | Flange |
Application | Flow Measurement, Vacuum Applications, Clean Rooms, HVAC/R, Fan Pressure Indication, Filtration Monitoring |
Process Connection Gender | Female |
Connection Location | Dual Single-Side or Back |
Includes Vent Plug | Yes |
Blowout Safety Back | Yes |
Pointer Material | Aluminum |
Case Diameter | 4.75 in |
Case Finish | Die Cast |
Process Connection Location | Dual Side or Back |
Dial Face Material | Plastic |
Process Connection | 1/8 in NPT Female |
Includes Mounting Hardware | Yes |
(Hidden) Series x Accuracy | +/-2.0% x 2000 Magnehelic |
Case Shape | Round |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Dwyer Magnehelic Pressure Gauge, 0 to 10 In H2O, DWYER INSTRUMENTS, Mfr# 2010AV
$76,25
Free shipping will be applied on orders over $50
Differential Pressure Gauge, Gauge Nominal Dial Size 4 in, Basic Gauge Case Material Metal, Differential Gauge Connection Type FNPT, Differential Gauge Connection Size 1/8 in, Gauge Connection Location Back and Side, Differential Pressure Range Units in wc, Differential Pressure Range Value 0 to 10, Gauge Accuracy +/-2.00 Percent, Body Material Die Cast Aluminum, Gauge Primary Range Smallest Graduation 0.2, Gauge Operating Temp. Range 20 Degrees to 140 Degrees F
9999 in stock
Must order in multiples of 1
Subtotal:
$76.25
You must be logged in to post a review.
Reviews
There are no reviews yet.