| Item | Pressure Plunger Pump |
| Type | Direct-Mount |
| Flow Capacity (GPM) | 3 gpm |
| RPM | 3,400 RPM |
| Shaft Dia. | 3/4 in |
| Inlet Port (In.) | 1/2 F |
| Max. Fluid Temp. (F) | 140 |
| HP Required @ 2500 PSI | 5.1 hp |
| Connecting Rod | Aluminum |
| HP Required @ 500 PSI | 1 hp |
| Plunger | Ceramic |
| Width (In.) | 7.5 in |
| Discharge Port (In.) | 3/8 Degrees F |
| Lubrication | Oil Bath |
| Discharge Pressure (PSI) | 2,500 psi |
| Pump Head | Forged Brass |
| Length (In.) | 7.2 in |
| HP Required @ 1500 PSI | 3.1 hp |
| Max. Inlet Pressure (PSI) | 50 psi |
| Crankshaft | Hardened Steel |
| Crankcase | Precision Die Cast |
| HP Required @ 1000 PSI | 2.1 hp |
| HP Required @ 2000 PSI | 4.1 hp |
| Driver Type | Gasoline Engine |
| Manifold Material | Forged Brass |
| Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
| Height (In.) | 4.9 in |
| Bearings | Needle/Ball |
| Seal | Buna N Chevron and Lip Seal Packing, Cotton Duct |
| Shaft Type | Hollow |
| Piston Design | Triplex |
| Flange Type | Horizontal Gas Engine |
| Manufacturers Warranty Length | 5 yr |
| Suction Port | 1/2 in BSP |
| Required Electric Motor Horsepower (Maximum) | Not Applicable |
| Crankshaft Material | Hardened Steel |
| Operating Pressure (Maximum) | 2,500 psi |
| Overall Width | 7.5 in |
| Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
| Hydraulic Motor Pressure @ 500 psi | Not Applicable |
| Crankcase Material | Die Cast Aluminum |
| Discharge Port | 3/8 in BSP |
| Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
| Overall Length | 7.2 in |
| Discharge Connection Type | BSP |
| Drive Type | Direct-Mount |
| Wetted Material | Brass |
| Intake Connection Size | 1/2 in |
| Number of Pistons | 3 |
| Flow Rate (Maximum) | 3 gpm |
| Motor Speed (Maximum) | 3,400 RPM |
| Check Valve Material | Not Applicable |
| Seal Material | Buna-N |
| Media Temperature (Maximum) | 140 Degrees F |
| Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
| Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
| Bearing Type | Ball, Needle Roller |
| Discharge Connection Size | 3/8 in |
| Overall Height | 4.9 in |
| Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
| Connecting Rod Material | Aluminum |
| Discharge Pressure (Maximum) | 2,500 psi |
| Electrical Connection Type | Not Applicable |
| Power Source | Not Applicable |
| Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
| Intake Connection Type | BSP |
| Shaft | 3/4 in Hollow |
| Required Gasoline Engine Horsepower (Maximum) | 6 hp |
| Series Family | RCV |
| Plunger Material | Ceramic |
| Shaft Outer Diameter | 3/4 in |
| Pump Head Material | Forged Brass |
| Seal Type | Chevron, Cotton Duct, Lip |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pressure Washer Pump, 3 GPM, 1/2 F x 3/8 F, DAYTON, Mfr# 4WXW1
$538,99
-$538.99 / ea
with subscription
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 3/8 in, Discharge Connection Type BSP, Discharge Pressure (Maximum) 2,500 psi, Flow Rate (Maximum) 3 gpm, Intake Connection Size 1/2 in, Intake Connection Type BSP, Motor Speed (Maximum) 3,400 RPM, Piston Design Triplex, Pump Head Material Forged Brass, Plunger Material Ceramic, Required Electric Motor Horsepower (Maximum) Not Applicable, Required Gasoline Engine Horsepower (Maximum) 6 hp, Lubrication Oil Bath, Shaft Outer Diameter 3/4 in
9999 in stock
Must order in multiples of 1
Subtotal:
$538.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.