Item | Pressure Plunger Pump |
Type | Direct-Mount |
Flow Capacity (GPM) | 2 gpm |
RPM | 1,750 RPM |
Shaft Dia. | 5/8 in |
Inlet Port (In.) | 1/2 F |
Discharge Pressure (PSI) | 2,500 psi |
Max. Inlet Pressure (PSI) | 50 psi |
Crankshaft | Hardened Steel |
HP Required @ 1000 PSI | 1.4 hp |
Plunger | SST |
Driver Type | Electric Motor |
Lubrication | Oil Bath |
Length (In.) | 7.7 in |
HP Required @ 500 PSI | 0.7 hp |
HP Required @ 2500 PSI | 3.4 hp |
Height (In.) | 5.5 in |
Crankcase | Precision Die Cast |
Seal | Buna N Chevron and Lip Seal Packing, Cotton Duct |
Bearings | Needle/Ball |
HP Required @ 2000 PSI | 2.7 hp |
Connecting Rod | Aluminum |
Max. Fluid Temp. (F) | 140 |
Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
Pump Head | Forged Brass |
Width (In.) | 7.2 in |
HP Required @ 1500 PSI | 2.1 hp |
Discharge Port (In.) | 3/8 Degrees F |
Manifold Material | Forged Brass |
Operating Pressure (Maximum) | 2,500 psi |
Required Electric Motor Horsepower (Maximum) | 5 hp |
Series Family | RCA |
Shaft | 5/8 in Hollow |
Hydraulic Motor Pressure @ 500 psi | Not Applicable |
Shaft Outer Diameter | 5/8 in |
Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
Motor Speed (Maximum) | 1,750 RPM |
Overall Width | 7.2 in |
Electrical Connection Type | Not Applicable |
Check Valve Material | Not Applicable |
Power Source | Not Applicable |
Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
Wetted Material | Brass |
Flow Rate (Maximum) | 2 gpm |
Required Gasoline Engine Horsepower (Maximum) | Not Applicable |
Overall Height | 5.5 in |
Crankshaft Material | Hardened Steel |
Manufacturers Warranty Length | 5 yr |
Drive Type | Direct-Mount |
Discharge Connection Type | BSP |
Shaft Type | Hollow |
Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
Pump Head Material | Forged Brass |
Flange Type | NEMA 182-184 |
Seal Material | Buna-N |
Overall Length | 7.7 in |
Intake Connection Size | 1/2 in |
Bearing Type | Ball, Needle Roller |
Discharge Pressure (Maximum) | 2,500 psi |
Media Temperature (Maximum) | 140 Degrees F |
Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
Number of Pistons | 3 |
Suction Port | 1/2 in BSP |
Discharge Port | 3/8 in BSP |
Plunger Material | Ceramic |
Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
Seal Type | Chevron, Cotton Duct, Lip |
Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
Piston Design | Triplex |
Intake Connection Type | BSP |
Connecting Rod Material | Aluminum |
Crankcase Material | Die Cast Aluminum |
Discharge Connection Size | 3/8 in |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pressure Washer Pump, 2 GPM, 1/2F x 3/8F, DAYTON, Mfr# 4WXW2
$470,99
-$14.13 / ea
with subscription
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 3/8 in, Discharge Connection Type BSP, Discharge Pressure (Maximum) 2,500 psi, Flow Rate (Maximum) 2 gpm, Intake Connection Size 1/2 in, Intake Connection Type BSP, Motor Speed (Maximum) 1,750 RPM, Piston Design Triplex, Pump Head Material Forged Brass, Plunger Material Ceramic, Required Electric Motor Horsepower (Maximum) 5 hp, Required Gasoline Engine Horsepower (Maximum) Not Applicable, Lubrication Oil Bath, Shaft Outer Diameter 5/8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$470.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.