| Item | Pressure Plunger Pump |
| Type | Direct-Mount |
| Flow Capacity (GPM) | 2.5 gpm |
| RPM | 3,400 RPM |
| Shaft Dia. | 3/4 in |
| Inlet Port (In.) | 1/2 F |
| Discharge Pressure (PSI) | 2,700 psi |
| Manifold Material | Forged Brass |
| Max. Inlet Pressure (PSI) | 50 psi |
| Connecting Rod | Aluminum |
| Plunger | Ceramic |
| HP Required @ 1000 PSI | 2.2 hp |
| HP Required @ 2000 PSI | 4.4 hp |
| Max. Fluid Temp. (F) | 140 |
| Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
| Crankshaft | Hardened Steel |
| Seal | Buna N Chevron and Lip Seal Packing, Cotton Duct |
| Width (In.) | 7.5 in |
| Height (In.) | 4.9 in |
| HP Required @ 2500 PSI | 5.6 hp |
| Driver Type | Gasoline Engine |
| Pump Head | Forged Brass |
| Lubrication | Oil Bath |
| Length (In.) | 7.2 in |
| Crankcase | Precision Die Cast |
| Discharge Port (In.) | 3/8 Degrees F |
| Bearings | Needle/Ball |
| HP Required @ 1500 PSI | 3.3 hp |
| HP Required @ 500 PSI | 1.1 hp |
| Flange Type | Horizontal Gas Engine |
| Shaft Type | Hollow |
| Discharge Pressure (Maximum) | 2,700 psi |
| Drive Type | Direct-Mount |
| Shaft | 3/4 in Hollow |
| Crankshaft Material | Hardened Steel |
| Hydraulic Motor Pressure @ 500 psi | Not Applicable |
| Check Valve Material | Not Applicable |
| Overall Width | 7.5 in |
| Pump Head Material | Forged Brass |
| Series Family | RCV |
| Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
| Discharge Connection Type | BSP |
| Required Electric Motor Horsepower (Maximum) | Not Applicable |
| Required Gasoline Engine Horsepower (Maximum) | 5 hp |
| Suction Port | 1/2 in BSP |
| Connecting Rod Material | Aluminum |
| Intake Connection Type | BSP |
| Intake Connection Size | 1/2 in |
| Plunger Material | Ceramic |
| Seal Material | Buna-N |
| Crankcase Material | Die Cast Aluminum |
| Overall Height | 4.9 in |
| Media Temperature (Maximum) | 140 Degrees F |
| Discharge Connection Size | 3/8 in |
| Discharge Port | 3/8 in BSP |
| Wetted Material | Brass |
| Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
| Flow Rate (Maximum) | 2.5 gpm |
| Motor Speed (Maximum) | 3,400 RPM |
| Shaft Outer Diameter | 3/4 in |
| Number of Pistons | 3 |
| Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
| Electrical Connection Type | Not Applicable |
| Manufacturers Warranty Length | 5 yr |
| Power Source | Not Applicable |
| Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
| Seal Type | Chevron, Cotton Duct, Lip |
| Bearing Type | Ball, Needle Roller |
| Overall Length | 7.2 in |
| Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
| Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
| Operating Pressure (Maximum) | 2,700 psi |
| Piston Design | Triplex |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pressure Washer Pump, 2.5 GPM, 1/2F x 3/8F, DAYTON, Mfr# 4WXV9
$497,99
-$14.94 / ea
with subscription
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 3/8 in, Discharge Connection Type BSP, Discharge Pressure (Maximum) 2,700 psi, Flow Rate (Maximum) 2.5 gpm, Intake Connection Size 1/2 in, Intake Connection Type BSP, Motor Speed (Maximum) 3,400 RPM, Piston Design Triplex, Pump Head Material Forged Brass, Plunger Material Ceramic, Required Electric Motor Horsepower (Maximum) Not Applicable, Required Gasoline Engine Horsepower (Maximum) 5 hp, Lubrication Oil Bath, Shaft Outer Diameter 3/4 in
9999 in stock
Must order in multiples of 1
Subtotal:
$497.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.