Item | Pressure Plunger Pump |
Type | Direct-Mount |
Flow Capacity (GPM) | 2.5 gpm |
RPM | 3,400 RPM |
Shaft Dia. | 7/8 in |
Inlet Port (In.) | 3/4 GH |
Manifold Material | Forged Brass |
HP Required @ 3000 PSI | - - |
Height (In.) | 6 in |
Max. Inlet Pressure (PSI) | 100 psi |
HP Required @ 1500 PSI | 3.3 hp |
Plunger | SST |
Max. Fluid Temp. (F) | 140 |
Crankshaft | Die-cast Aluminum |
HP Required @ 500 PSI | 1.1 hp |
Bearings | Needle/Ball |
Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
Seal | Lip |
Crankcase | Precision Die Cast |
Driver Type | Gasoline Engine |
Discharge Port (In.) | 22 mm |
HP Required @ 4000 PSI | --- |
Discharge Pressure (PSI) | 2,500 psi |
Lubrication | Oil Bath |
HP Required @ 1000 PSI | 2.2 hp |
Width (In.) | 9.2 in |
Length (In.) | 6.3 in |
HP Required @ 2500 PSI | 5.6 hp |
HP Required @ 2000 PSI | 4.4 hp |
Pump Head | Forged Brass |
Piston Design | Axial |
Drive Type | Direct-Mount |
Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
Flange Type | Vertical Gas Engine |
Electrical Connection Type | Not Applicable |
Flow Rate (Maximum) | 2.5 gpm |
Media Temperature (Maximum) | 140 Degrees F |
Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
Series Family | RMW |
Required Gasoline Engine Horsepower (Maximum) | 5 hp |
Discharge Pressure (Maximum) | 2,500 psi |
Pump Head Material | Forged Brass |
Suction Port | 3/4 in Garden Hose |
Overall Width | 9.2 in |
Shaft Outer Diameter | 7/8 in |
Wetted Material | Brass |
Power Source | Not Applicable |
Bearing Type | Ball, Needle Roller |
Discharge Port | 22 mm |
Check Valve Material | Not Applicable |
Intake Connection Type | Garden Hose |
Motor Speed (Maximum) | 3,400 RPM |
Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
Hydraulic Motor Pressure @ 500 psi | Not Applicable |
Operating Pressure (Maximum) | 2,500 psi |
Seal Type | Lip |
Connecting Rod Material | Aluminum |
Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
Shaft | 7/8 in Hollow |
Crankcase Material | Die Cast Aluminum |
Plunger Material | Stainless Steel |
Number of Pistons | 3 |
Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
Manufacturers Warranty Length | 1 yr |
Discharge Connection Size | 22 mm |
Crankshaft Material | Die Cast Aluminum |
Overall Height | 6 in |
Intake Connection Size | 3/4 in |
Shaft Type | Hollow |
Overall Length | 6.3 in |
Required Electric Motor Horsepower (Maximum) | Not Applicable |
Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pressure Washer Pump, 2.5 GPM, 3/4GF x M22, DAYTON, Mfr# 4WXX9
$315,99
-$9.48 / ea
with subscription
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 22 mm, Discharge Pressure (Maximum) 2,500 psi, Flow Rate (Maximum) 2.5 gpm, Intake Connection Size 3/4 in, Intake Connection Type Garden Hose, Motor Speed (Maximum) 3,400 RPM, Piston Design Axial, Pump Head Material Forged Brass, Plunger Material Stainless Steel, Required Electric Motor Horsepower (Maximum) Not Applicable, Required Gasoline Engine Horsepower (Maximum) 5 hp, Lubrication Oil Bath, Shaft Outer Diameter 7/8 in, Shaft Type Hollow
Out of stock
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.