| Item | Pressure Plunger Pump |
| Type | Direct-Mount |
| Flow Capacity (GPM) | 2.5 gpm |
| RPM | 3,400 RPM |
| Shaft Dia. | 3/4 in |
| Inlet Port (In.) | 3/4 GH |
| HP Required @ 1500 PSI | 3.3 hp |
| HP Required @ 500 PSI | 1.1 hp |
| Max. Fluid Temp. (F) | 140 |
| Lubrication | Oil Bath |
| HP Required @ 2500 PSI | 5.6 hp |
| Crankcase | Precision Die Cast |
| Crankshaft | Die-cast Aluminum |
| Driver Type | Gasoline Engine |
| Length (In.) | 7.1 in |
| Width (In.) | 5.5 in |
| Discharge Port (In.) | 22 mm |
| Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
| Manifold Material | Forged Brass |
| HP Required @ 2000 PSI | 4.4 hp |
| Discharge Pressure (PSI) | 2,700 psi |
| Max. Inlet Pressure (PSI) | 100 psi |
| Bearings | Needle/Ball |
| Pump Head | Forged Brass |
| Seal | Lip |
| HP Required @ 3000 PSI | 6.5 hp |
| HP Required @ 1000 PSI | 2.2 hp |
| Height (In.) | 6 in |
| Plunger | Ceramic |
| Drive Type | Direct-Mount |
| Shaft | 3/4 in Hollow |
| Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
| Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
| Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
| Check Valve Material | Not Applicable |
| Overall Length | 7.1 in |
| Motor Speed (Maximum) | 3,400 RPM |
| Discharge Pressure (Maximum) | 2,700 psi |
| Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
| Intake Connection Type | Garden Hose |
| Electrical Connection Type | Not Applicable |
| Intake Connection Size | 3/4 in |
| Pump Head Material | Forged Brass |
| Hydraulic Motor Pressure @ 500 psi | Not Applicable |
| Bearing Type | Ball, Needle Roller |
| Discharge Port | 22 mm |
| Shaft Outer Diameter | 3/4 in |
| Overall Width | 5.5 in |
| Flow Rate (Minimum) | 0.25 gpm |
| Overall Height | 6 in |
| Plunger Material | Stainless Steel |
| Required Electric Motor Horsepower (Maximum) | Not Applicable |
| Crankcase Material | Die Cast Aluminum |
| Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
| Shaft Type | Hollow |
| Flow Rate (Maximum) | 2.5 gpm |
| Wetted Material | Brass |
| Piston Design | Axial |
| Connecting Rod Material | Aluminum |
| Seal Type | Lip |
| Discharge Connection Size | 22 mm |
| Operating Pressure (Maximum) | 2,700 psi |
| Suction Port | 3/4 in Garden Hose |
| Power Source | Not Applicable |
| Manufacturers Warranty Length | 1 yr |
| Media Temperature (Maximum) | 140 Degrees F |
| Series Family | RMV |
| Number of Pistons | 3 |
| Crankshaft Material | Die Cast Aluminum |
| Flange Type | Horizontal Gas Engine |
| Required Gasoline Engine Horsepower (Maximum) | 6 hp |
| Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pressure Washer Pump, 2.5 GPM, 3/4GH x M22, DAYTON, Mfr# 4WXW7
$309,99
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 22 mm, Discharge Pressure (Maximum) 2,700 psi, Flow Rate (Maximum) 2.5 gpm, Intake Connection Size 3/4 in, Intake Connection Type Garden Hose, Motor Speed (Maximum) 3,400 RPM, Piston Design Axial, Pump Head Material Forged Brass, Plunger Material Stainless Steel, Required Electric Motor Horsepower (Maximum) Not Applicable, Required Gasoline Engine Horsepower (Maximum) 6 hp, Lubrication Oil Bath, Shaft Outer Diameter 3/4 in, Shaft Type Hollow
Out of stock
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.