| Item | Pressure Plunger Pump |
| Type | Direct-Mount |
| Flow Capacity (GPM) | 3 gpm |
| RPM | 1,750 RPM |
| Shaft Dia. | 5/8 in |
| Inlet Port (In.) | 1/2 F |
| Lubrication | Oil Bath |
| Manifold Material | Forged Brass |
| Width (In.) | 7.2 in |
| Pump Head | Forged Brass |
| Bearings | Needle/Ball |
| Crankcase | Precision Die Cast |
| Height (In.) | 5.5 in |
| Plunger | Ceramic |
| Connecting Rod | Aluminum |
| Discharge Pressure (PSI) | 2,500 psi |
| Driver Type | Electric Motor |
| HP Required @ 2000 PSI | 4.1 hp |
| Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
| Length (In.) | 7.7 in |
| HP Required @ 1000 PSI | 2.1 hp |
| Max. Inlet Pressure (PSI) | 50 psi |
| Crankshaft | Hardened Steel |
| HP Required @ 500 PSI | 1 hp |
| HP Required @ 2500 PSI | 5.1 hp |
| HP Required @ 1500 PSI | 3.1 hp |
| Seal | Buna N Chevron and Lip Seal Packing, Cotton Duct |
| Max. Fluid Temp. (F) | 140 |
| Discharge Port (In.) | 3/8 Degrees F |
| Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
| Crankshaft Material | Hardened Steel |
| Wetted Material | Brass |
| Required Electric Motor Horsepower (Maximum) | 5 hp |
| Check Valve Material | Not Applicable |
| Drive Type | Direct-Mount |
| Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
| Discharge Pressure (Maximum) | 2,500 psi |
| Media Temperature (Maximum) | 140 Degrees F |
| Power Source | Not Applicable |
| Series Family | RCA |
| Seal Type | Chevron, Cotton Duct, Lip |
| Discharge Connection Type | BSP |
| Suction Port | 1/2 in BSP |
| Overall Height | 5.5 in |
| Pump Head Material | Forged Brass |
| Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
| Shaft | 5/8 in Hollow |
| Electrical Connection Type | Not Applicable |
| Seal Material | Buna-N |
| Overall Width | 7.2 in |
| Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
| Shaft Type | Hollow |
| Required Gasoline Engine Horsepower (Maximum) | Not Applicable |
| Number of Pistons | 3 |
| Shaft Outer Diameter | 5/8 in |
| Overall Length | 7.7 in |
| Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
| Flange Type | NEMA 56-C |
| Manufacturers Warranty Length | 5 yr |
| Hydraulic Motor Pressure @ 500 psi | Not Applicable |
| Plunger Material | Ceramic |
| Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
| Connecting Rod Material | Aluminum |
| Crankcase Material | Die Cast Aluminum |
| Operating Pressure (Maximum) | 2,500 psi |
| Discharge Port | 3/8 in BSP |
| Intake Connection Type | BSP |
| Piston Design | Triplex |
| Bearing Type | Ball, Needle Roller |
| Discharge Connection Size | 3/8 in |
| Intake Connection Size | 1/2 in |
| Flow Rate (Maximum) | 3 gpm |
| Motor Speed (Maximum) | 1,750 RPM |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pressure Washer Pump, 3 GPM, 1/2 F x 3/8 F, DAYTON, Mfr# 4WXW4
$471,99
-$14.16 / ea
with subscription
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 3/8 in, Discharge Connection Type BSP, Discharge Pressure (Maximum) 2,500 psi, Flow Rate (Maximum) 3 gpm, Intake Connection Size 1/2 in, Intake Connection Type BSP, Motor Speed (Maximum) 1,750 RPM, Piston Design Triplex, Pump Head Material Forged Brass, Plunger Material Ceramic, Required Electric Motor Horsepower (Maximum) 5 hp, Required Gasoline Engine Horsepower (Maximum) Not Applicable, Lubrication Oil Bath, Shaft Outer Diameter 5/8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$471.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.