| Item | Pressure Plunger Pump |
| Type | Direct-Mount |
| Flow Capacity (GPM) | 4 gpm |
| RPM | 3,400 RPM |
| Shaft Dia. | 1 in |
| Inlet Port (In.) | 1/2 F |
| Length (In.) | 8.8 in |
| HP Required @ 3000 PSI | 12.3 hp |
| Pump Head | Forged Brass |
| Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
| Height (In.) | 6.5 in |
| Discharge Port (In.) | 3/8 Degrees F |
| Max. Inlet Pressure (PSI) | 100 psi |
| Features | Forged Brass Manifold Provides Corrosion Resistance For Long Term Use. High Grade Manifold Head Bolts For Added Safety Protection and Strength. Precision Diecast Crankcase For Maximum Heat Dissipation. |
| Seal | Buna N, Cotton Duct |
| HP Required @ 500 PSI | 2.1 hp |
| Driver Type | Gasoline Engine |
| Max. Fluid Temp. (F) | 140 |
| HP Required @ 3500 PSI | 14.3 hp |
| HP Required @ 4000 PSI | 16.4 hp |
| Discharge Pressure (PSI) | 3,700 psi |
| Plunger | Ceramic |
| Bearings | Ball and Needle |
| Crankshaft | Hardened Steel |
| HP Required @ 1000 PSI | 4.1 hp |
| Width (In.) | 9.5 in |
| HP Required @ 2500 PSI | 10.2 hp |
| Lubrication | Oil Bath |
| Crankcase | Die Cast Aluminum |
| HP Required @ 1500 PSI | 6.1 hp |
| Connecting Rod | Aluminum |
| Includes | Manual |
| Manifold Material | Forged Brass |
| HP Required @ 2000 PSI | 8.2 hp |
| Shaft Type | Hollow |
| Flange Type | Horizontal Gas Engine |
| Required Gasoline Engine Horsepower (Maximum) | 13 hp |
| Piston Design | Triplex |
| Intake Connection Type | BSP |
| Crankshaft Material | Hardened Steel |
| Seal Material | Buna-N |
| Check Valve Material | Not Applicable |
| Manufacturers Warranty Length | 5 yr |
| Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
| Connecting Rod Material | Aluminum |
| Shaft Outer Diameter | 1 in |
| Discharge Connection Size | 3/8 in |
| Crankcase Material | Die Cast Aluminum |
| Number of Pistons | 3 |
| Bearing Type | Ball, Needle Roller |
| Operating Pressure (Maximum) | 3,700 psi |
| Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
| Discharge Port | 3/8 in BSP |
| Overall Length | 8.8 in |
| Discharge Connection Type | BSP |
| Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
| Wetted Material | Brass |
| Overall Height | 6.5 in |
| Discharge Pressure (Maximum) | 3,700 psi |
| Seal Type | Cotton Duct |
| Hydraulic Motor Pressure @ 500 psi | Not Applicable |
| Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
| Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
| Electrical Connection Type | Not Applicable |
| Plunger Material | Ceramic |
| Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
| Shaft | 1 in Hollow |
| Suction Port | 1/2 in BSP |
| Series Family | RRV |
| Media Temperature (Maximum) | 140 Degrees F |
| Overall Width | 9.5 in |
| Flow Rate (Maximum) | 4 gpm |
| Required Electric Motor Horsepower (Maximum) | Not Applicable |
| Intake Connection Size | 1/2 in |
| Pump Head Material | Forged Brass |
| Power Source | Not Applicable |
| Motor Speed (Maximum) | 3,400 RPM |
| Drive Type | Direct-Mount |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pressure Washer Pump, 3700 PSI, DAYTON, Mfr# 5ZNU0
$779,99
-$23.4 / ea
with subscription
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 3/8 in, Discharge Connection Type BSP, Discharge Pressure (Maximum) 3,700 psi, Flow Rate (Maximum) 4 gpm, Intake Connection Size 1/2 in, Intake Connection Type BSP, Motor Speed (Maximum) 3,400 RPM, Piston Design Triplex, Pump Head Material Forged Brass, Plunger Material Ceramic, Required Electric Motor Horsepower (Maximum) Not Applicable, Required Gasoline Engine Horsepower (Maximum) 13 hp, Lubrication Oil Bath, Shaft Outer Diameter 1 in
9999 in stock
Must order in multiples of 1
Subtotal:
$779.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.