Promotion Restriction
Not eligible for promotion
For Use With
Telephone Jacks
Primary Function
Copper Cable Tracing (Tone u0026 Probe Kit)
Includes
60 Hz Filter, Carrying Case
Special Features
(5) Different Cadence, Tones Up to 10 Miles
Calibration Certificate
Not Included
Eithernet Service Detection
Yes
Data Line Polarity Indicator
No
Cable Speed Qualification
No
Telephone Service Detection
Yes
Ethernet Service Detection
Yes
Product Type
Tone Generator and Probe Kit
Solid Frequency
1000 Hz nominal
Alternating Frequency
1000/1500 Hz nominal
User interface
Tone mode LED || Slide switch selects Continuity or Tone Mode || Push button switch selects SOLID, ALT or OFF || Continuity/Polarity LED, Volume dial || ON/OFF push button || 3. 5 mm earphone jack || Replaceable tip
Over Voltage Protection
60 Vdc in Toner/Polarity Mode
Output Voltage Level in Continuity Mode
8 Vdc with fresh battery
Output Power in Tone Mode
8 dbm into 600 ohms
Temperature
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Additional Information
Pro 3000 Toner Specifications: User Interface: Slide Switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT, or OFF Tone mode LED Continuity/Polarity LED, Solid Frequency: 1000 Hz nominal, Alternating Frequency: 1000/1500 Hz nominal, Over Voltage: Protection/tdu0026gt; 60 Vdc in Toner/Polarity Mode, Output Power in Tone Mode: 8 dbm into 600 ohms, Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery, Battery: 9V alkaline, Temperature: Operating: -20°C to 60°C, Storage: -40° to 70° C, Dimensions: 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) Pro3000F Filtered Probe Specifications: User Interface: ON/OFF button (Push 1 second to activate, Press to turn off, Auto-off after 5 minutes) Filtered/Unfiltered Mode Button with LED (Green = Filtered, Red = Unfiltered) Volume dial Replaceable tip 3.5 mm earphone jack, Frequencies filtered: Pro3000F60 Probe: 60 Hz and its harmonic frequencies Pro3000F50 Probe: 50 Hz and its harmonic frequencies, Battery: 9V alkaline, Temperature: Operating: -20° C to 60° C, Storage: -40° to 70° C, Dimensions: 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)
Package Contents
Pro3000F Filtered Probe (60 Hz) and Tone Generator Kit, Nylon Pouch
Battery Size Supported
Proprietary Battery Size
Product Name
Pro3000F Filtered Probe (60 Hz) and Tone Generator Kit
Device Function
Cable Signal Testing, Telephone Cable Testing, Short Circuit Testing, Open Circuit Testing, Continuity Testing
Battery Chemistry
Alkaline
Maximum Impedance Measured
600 ohm
Maximum Operating Temperature
140 Degrees F
Maximum Cable Length
10 mi
Minimum Operating Temperature
-4 Degrees F
Wire Mapping Detections
Opens, Shorts
Testing Functions
Tone Detection, Tone Generation
User interface (Probe)
ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack
User interface (Toner)
Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED
Country of Origin (subject to change)
Malaysia
