| Item | Progressive Cavity Pump |
| Pump Operation Type | Motorized |
| Suction Port | 1 in NPT |
| Horsepower (Maximum) | 3/4 hp |
| Number of Stages | 2 |
| Operating Pressure (Maximum) | 350 psi |
| Shut Off Pressure (Maximum) | 140 psi |
| Solid Diameter (Maximum) | 0.1 in |
| Nameplate Voltage | 115V AC |
| Flow Rate (Minimum) | 0.5 gph |
| Media Temperature (Maximum) | 120 Degrees F |
| Discharge Connection Size | 1/2 in |
| Turn Down Ratio | 20:1 |
| Priming | Self-Priming |
| Discharge Connection Type | NPT |
| Product Type | Progressive Cavity Pump |
| Flow Rate (Maximum) | 43.2 gph |
| Control Programs | Manual Control |
| Motor Speed (Maximum) | 580 RPM |
| Shaft Outer Diameter | 25 mm |
| Phase | Single |
| Viscosity (Maximum) | 1,500 cps |
| Stator Material | Viton |
| Stator Movement | Rigid |
| Discharge Port | 1/2 in NPT |
| Rotor Material | Stainless Steel |
| Intake Connection Type | NPT |
| Chemical Compatibility | Alcohol, Oils |
| Intake Connection Size | 1 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Progressive Cavity Pump, 140 psi, 43.2 gph, SEEPEX, Mfr# MD IMP 012-12
$5542,99
Free shipping will be applied on orders over $50
Progressive Cavity Pump, Discharge Connection Size 1/2 in, Discharge Connection Type NPT, Flow Rate (Maximum) 43.2 gph, Housing Material Stainless Steel, Intake Connection Size 1 in, Intake Connection Type NPT, Media Temperature (Maximum) 120 Degrees F, Motor Speed (Maximum) 580 RPM, Rotor Material Stainless Steel, Seal Material Viton, Shut Off Pressure (Maximum) 140 psi, Stator Material Viton, Turn Down Ratio 20:1, Viscosity (Maximum) 1,500 cps, Chemical Compatibility Alcohol, Oils
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.