| Item | Progressive Cavity Pump |
| Discharge Port | 1/2 in NPT |
| Number of Stages | 4 |
| Solid Diameter (Maximum) | 0.1 in |
| Viscosity (Maximum) | 1,500 cps |
| Flow Rate (Minimum) | 0.1 gph |
| Rotor Material | Stainless Steel |
| Motor Speed (Maximum) | 580 RPM |
| Shaft Outer Diameter | 25 mm |
| Pump Operation Type | Motorized |
| Priming | Self-Priming |
| Shut Off Pressure (Maximum) | 280 psi |
| Discharge Connection Type | NPT |
| Stator Material | Viton |
| Discharge Connection Size | 1/2 in |
| Operating Pressure (Maximum) | 350 psi |
| Intake Connection Size | 1 in |
| Stator Movement | Rigid |
| Media Temperature (Maximum) | 120 Degrees F |
| Nameplate Voltage | 115V AC |
| Horsepower (Maximum) | 3/4 hp |
| Control Programs | Manual Control |
| Intake Connection Type | NPT |
| Suction Port | 1 in NPT |
| Chemical Compatibility | Alcohol, Oils |
| Turn Down Ratio | 20:1 |
| Flow Rate (Maximum) | 5.2 gph |
| Phase | Single |
| Product Type | Progressive Cavity Pump |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Progressive Cavity Pump, 280 psi, 5.2 gph, SEEPEX, Mfr# MDR IMP 0015-24
$7122,99
Free shipping will be applied on orders over $50
Progressive Cavity Pump, Discharge Connection Size 1/2 in, Discharge Connection Type NPT, Flow Rate (Maximum) 5.2 gph, Housing Material Stainless Steel, Intake Connection Size 1 in, Intake Connection Type NPT, Media Temperature (Maximum) 120 Degrees F, Motor Speed (Maximum) 580 RPM, Rotor Material Stainless Steel, Seal Material Viton, Shut Off Pressure (Maximum) 280 psi, Stator Material Viton, Turn Down Ratio 20:1, Viscosity (Maximum) 1,500 cps, Chemical Compatibility Alcohol, Oils
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.