Item | Chemical Resistant Centrifugal Pump |
HP | 2 hp |
Housing Material | 304 Stainless Steel |
Phase | Three |
Voltage | 208-230/460 |
Max. GPM @ Head | 130 gpm @ 5 ft |
Max. Head | 68 ft |
Best Efficiency GPM @ Head | 55 gpm @ 50 ft |
Inlet | 2 in NPT |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
GPM of Water @ 25 Ft. of Head | 102 |
Service Factor | 1.15 |
Manufacturers Warranty Length | 1 yr |
Inlet Pressure | 121 psi |
Includes | Manual |
GPM of Water @ 5 Ft. of Head | 130 |
Bearing Type | Ball |
Wetted Materials | 304 Stainless Steel, Carbon, Ceramic, Viton |
Screw Material | Stainless Steel |
GPM of Water @ 50 Ft. of Head | 55 |
GPM of Water @ 60 Ft. of Head | 24 |
Max. Dia. Solids | 1/8 in |
Shaft Material | Stainless Steel |
GPM of Water @ 20 Ft. of Head | 109 |
Max. Case Pressure | 150 psi |
GPM of Water @ 15 Ft. of Head | 110 |
Motor RPM | 3,450 RPM |
GPM of Water @ 10 Ft. of Head | 114 |
Length | 14 9/16 in |
Seal Type | Mechanical |
Max. Fluid Viscosity | 31 SUS |
Max. Specific Gravity | 1.0 |
Port Rotation | 90 Degrees Increments |
Min. GPM @ Head | 24 gpm @ 60 ft |
Duty | Continuous |
Amps | 9.6-9.2/4.6 |
Height | 7 3/4 in |
Impeller Material | 304 Stainless Steel |
GPM of Water @ 30 Ft. of Head | 92 |
Hz | 60 |
Width | 10 1/2 in |
GPM of Water @ 40 Ft. of Head | 85 |
Agency Compliance | CUS |
Drain Plug | No |
Impeller Type | Closed |
Best Efficiency Range GPM @ Head | 26 to 100 gpm @ 60 to 100 ft |
Application | Chemical Processing, Circulation, Cooling, Liquids Transfer, Pressure Boosting and Circulating |
Max. Liquid Temp. | 200 Degrees F |
Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
NEMA/IEC Frame | 56J |
Motor Type | Three-Phase Induction |
Volute Material | 304 Stainless Steel |
Standards | CUS |
Overall Height | 7.8 in |
Overall Width | 10.5 in |
Overall Length | 14.6 in |
Intake Pipe Type | NPT |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Ambient Temperature (Minimum) | 40 Degrees F |
Specific Gravity (Maximum) | 1 |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Discharge Pipe Size | 1 1/2 in |
Priming | Manual |
Cord Length | Not Applicable |
Best Efficiency Head | 50 ft |
Duty Cycle | Continuous |
Best Efficiency Flow | 55 gpm |
Flow Rate @ 1 ft of Head (Maximum) | 118 gpm |
Flow Rate (Minimum) | 24 gpm |
Electrical Connection Type | Not Applicable |
Impeller Design | Closed |
Intake Pipe Size | 2 in |
Wetted Material | 304 Stainless Steel, Carbon, Ceramic, Viton |
Current | 4.0 or 2.0 A |
Flow Rate (Maximum) | 130 gpm |
Media Temperature (Maximum) | 200 Degrees F |
Flow Rate @ 15 ft of Head (Maximum) | 106 gpm |
Media Temperature (Minimum) | 40 Degrees F |
Shaft Outer Diameter | 7/16 in |
Ambient Temperature (Maximum) | 104 Degrees F |
Flow Rate @ 10 ft of Head (Maximum) | 114 gpm |
Discharge Port | 1 1/2 in NPT |
For Use With Potable Systems | No |
Horsepower (Maximum) | 2 hp |
Flow Rate @ 20 ft of Head (Maximum) | 109 gpm |
Compatible Motor Frame | 56J NEMA |
Suction Port | 2 in NPT |
Viscosity (Maximum) | 31 SUS |
Discharge Rotation | 90 Degrees Increments |
Solid Diameter (Maximum) | 0.13 in |
Feet of Head (Maximum) | 68 ft |
Flow Rate @ 60 ft of Head (Maximum) | 24 gpm |
Flow Rate @ 5 ft of Head (Maximum) | 117 gpm |
Frequency | 60 Hz |
Shut Off Pressure (Maximum) | 150 psi |
Nameplate Voltage | 208-230/460V AC |
Flow Rate @ 40 ft of Head (Maximum) | 75 gpm |
Discharge Pipe Type | NPT |
Motor Speed (Maximum) | 3,450 RPM |
Case Pressure (Maximum) | 150 psi |
Flow Rate @ 30 ft of Head (Maximum) | 92 gpm |
Flow Rate @ 25 ft of Head (Maximum) | 100 gpm |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump, 2 HP, 208-230/460V, 9.6-9.2/4.6 Amp, DAYTON, Mfr# 4JMX7
$1188,99
-$295.63 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 68 ft, Flow Rate (Maximum) 130 gpm, Horsepower (Maximum) 2 hp, Housing Material 304 Stainless Steel, Impeller Design Closed, Impeller Material 304 Stainless Steel, Intake Pipe Size 2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 200 Degrees F, Phase Three, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 31 SUS, Flow Rate @ 10 ft of Head (Maximum) 114 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$1188.99
You must be logged in to post a review.
Reviews
There are no reviews yet.