Item | Chemical Resistant Centrifugal Pump |
HP | 3 hp |
Housing Material | 304 Stainless Steel |
Phase | Three |
Voltage | 230/460 |
Max. GPM @ Head | 150 gpm @ 5 ft |
Max. Head | 81 ft |
Inlet | 2 in NPT |
Best Efficiency GPM @ Head | 90 gpm @ 48 ft |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Open Dripproof |
Manufacturers Warranty Length | 1 yr |
Max. Case Pressure | 150 psi |
Max. Dia. Solids | 1/8 in |
GPM of Water @ 80 Ft. of Head | 5 |
GPM of Water @ 5 Ft. of Head | 150 |
Includes | Manual |
Hz | 60 |
Length | 15 9/16 in |
Impeller Material | 304 Stainless Steel |
Width | 8 9/16 in |
GPM of Water @ 70 Ft. of Head | 38 |
Application | Chemical Processing, Circulation, Cooling, Liquids Transfer, Pressure Boosting and Circulating |
Inlet Pressure | 115 psi |
Amps | 11.6/5.8 |
GPM of Water @ 30 Ft. of Head | 116 |
Bearing Type | Ball |
GPM of Water @ 20 Ft. of Head | 131 |
Min. GPM @ Head | 38 gpm @ 70 ft |
Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
Port Rotation | 90 Degrees Increments |
Best Efficiency Range GPM @ Head | 90 to 110 gpm @ 48 to 28 ft |
Max. Fluid Viscosity | 31 SUS |
Max. Specific Gravity | 1.0 |
Impeller Type | Closed |
GPM of Water @ 10 Ft. of Head | 144 |
NEMA/IEC Frame | 56J |
Max. Liquid Temp. | 200 Degrees F |
Duty | Continuous |
Service Factor | 1.15 |
Motor RPM | 3,450 RPM |
Height | 7 3/4 in |
Seal Type | Mechanical |
GPM of Water @ 60 Ft. of Head | 62 |
GPM of Water @ 25 Ft. of Head | 126 |
Wetted Materials | 304 Stainless Steel, Carbon, Ceramic, Viton |
Screw Material | Stainless Steel |
GPM of Water @ 40 Ft. of Head | 105 |
GPM of Water @ 15 Ft. of Head | 138 |
Shaft Material | Stainless Steel |
Drain Plug | No |
Agency Compliance | CUS |
GPM of Water @ 50 Ft. of Head | 85 |
Motor Type | Three-Phase Induction |
Volute Material | 304 Stainless Steel |
Overall Width | 8.6 in |
Standards | CUS |
Overall Length | 15.6 in |
Overall Height | 7.8 in |
Priming | Manual |
Flow Rate @ 15 ft of Head (Maximum) | 138 gpm |
Flow Rate @ 25 ft of Head (Maximum) | 126 gpm |
Discharge Pipe Type | NPT |
Feet of Head (Maximum) | 81 ft |
Flow Rate (Minimum) | 38 gpm |
Case Pressure (Maximum) | 150 psi |
Best Efficiency Head | 48 ft |
Flow Rate @ 70 ft of Head (Maximum) | 25 gpm |
Discharge Port | 1 1/2 in NPT |
Solid Diameter (Maximum) | 0.13 in |
Flow Rate @ 60 ft of Head (Maximum) | 62 gpm |
Viscosity (Maximum) | 31 SUS |
Suction Port | 2 in NPT |
Shut Off Pressure (Maximum) | 150 psi |
Discharge Pipe Size | 1 1/2 in |
Ambient Temperature (Maximum) | 104 Degrees F |
Best Efficiency Flow | 90 gpm |
Motor Speed (Maximum) | 3,450 RPM |
Media Temperature (Minimum) | 40 Degrees F |
Intake Pipe Size | 2 in |
Discharge Rotation | 90 Degrees Increments |
For Use With Potable Systems | No |
Flow Rate @ 30 ft of Head (Maximum) | 116 gpm |
Flow Rate @ 10 ft of Head (Maximum) | 144 gpm |
Media Temperature (Maximum) | 200 Degrees F |
Wetted Material | 304 Stainless Steel, Carbon, Ceramic, Viton |
Shaft Outer Diameter | 7/16 in |
Flow Rate @ 1 ft of Head (Maximum) | 152 gpm |
Duty Cycle | Continuous |
Cord Length | Not Applicable |
Flow Rate @ 20 ft of Head (Maximum) | 131 gpm |
Ambient Temperature (Minimum) | 40 Degrees F |
Frequency | 60 Hz |
Current | 11.6 or 5.8 A |
Flow Rate @ 40 ft of Head (Maximum) | 105 gpm |
Specific Gravity (Maximum) | 1 |
Impeller Design | Closed |
Nameplate Voltage | 230/460V AC |
Flow Rate @ 80 ft of Head (Maximum) | 3 gpm |
Compatible Motor Frame | 56J NEMA |
Electrical Connection Type | Not Applicable |
Intake Pipe Type | NPT |
Horsepower (Maximum) | 3 hp |
Flow Rate @ 5 ft of Head (Maximum) | 150 gpm |
Flow Rate (Maximum) | 150 gpm |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump, 3 HP, 230/460V, 11.6/5.8 Amp, DAYTON, Mfr# 4JMW5
$973,99
-$29.22 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 81 ft, Flow Rate (Maximum) 150 gpm, Horsepower (Maximum) 3 hp, Housing Material 304 Stainless Steel, Impeller Design Closed, Impeller Material 304 Stainless Steel, Intake Pipe Size 2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 200 Degrees F, Phase Three, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 31 SUS, Flow Rate @ 10 ft of Head (Maximum) 144 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$973.99
You must be logged in to post a review.
Reviews
There are no reviews yet.