| HP | 2 hp |
| Item | Chemical Resistant Centrifugal Pump |
| Housing Material | 316 Stainless Steel |
| Phase | Three |
| Voltage | 208-230/460 |
| Max. GPM @ Head | 130 gpm @ 5 ft |
| Max. Head | 68 ft |
| Inlet | 2 in NPT |
| Best Efficiency GPM @ Head | 55 gpm @ 50 ft |
| Outlet | 1-1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Seal Type | Mechanical |
| GPM of Water @ 5 Ft. of Head | 130 |
| Max. Case Pressure | 150 psi |
| GPM of Water @ 25 Ft. of Head | 102 |
| Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
| Motor RPM | 3,450 RPM |
| Port Rotation | 90 Degrees Increments |
| Max. Liquid Temp. | 300 Degrees F |
| Screw Material | Stainless Steel |
| Max. Fluid Viscosity | 260 SUS |
| Wetted Materials | 316 Stainless Steel, Carbon, Ceramic, Viton |
| GPM of Water @ 50 Ft. of Head | 55 |
| Service Factor | 1.15 |
| GPM of Water @ 15 Ft. of Head | 110 |
| Includes | Manual |
| Width | 10 1/2 in |
| Manufacturers Warranty Length | 1 yr |
| GPM of Water @ 60 Ft. of Head | 24 |
| Impeller Material | 316 Stainless Steel |
| Max. Dia. Solids | 1/8 in |
| GPM of Water @ 30 Ft. of Head | 92 |
| Length | 14 9/16 in |
| Bearing Type | Ball |
| Application | Chemical Processing, Circulating, Cooling, Liquid Transfer, Pressure Boosting, Recirculation |
| GPM of Water @ 40 Ft. of Head | 85 |
| Agency Compliance | CUS |
| Impeller Type | Closed |
| Max. Specific Gravity | 1.0 |
| Height | 7 3/4 in |
| Shaft Material | Stainless Steel |
| Best Efficiency Range GPM @ Head | 100 to 26 gpm @ 26 to 60 ft |
| GPM of Water @ 10 Ft. of Head | 114 |
| Inlet Pressure | 121 psi |
| GPM of Water @ 20 Ft. of Head | 109 |
| Hz | 60 |
| Drain Plug | No |
| Amps | 9.6-9.2/4.6 |
| Duty | Continuous |
| NEMA/IEC Frame | 56J |
| Min. GPM @ Head | 24 gpm @ 60 ft |
| Motor Type | Three-Phase Induction |
| Volute Material | 316 Stainless Steel |
| Standards | CUS |
| Overall Height | 7.8 in |
| Overall Length | 14.6 in |
| Overall Width | 10.5 in |
| Flow Rate @ 20 ft of Head (Maximum) | 109 gpm |
| Flow Rate @ 10 ft of Head (Maximum) | 114 gpm |
| Flow Rate @ 1 ft of Head (Maximum) | 118 gpm |
| Specific Gravity (Maximum) | 1 |
| Nameplate Voltage | 208-230/460V AC |
| Electrical Connection Type | Not Applicable |
| Best Efficiency Head | 50 ft |
| Flow Rate @ 40 ft of Head (Maximum) | 75 gpm |
| Cord Length | Not Applicable |
| Motor Speed (Maximum) | 3,450 RPM |
| Solid Diameter (Maximum) | 0.13 in |
| Impeller Design | Closed |
| Horsepower (Maximum) | 2 hp |
| Flow Rate (Minimum) | 24 gpm |
| Intake Pipe Size | 2 in |
| Frequency | 60 Hz |
| Feet of Head (Maximum) | 68 ft |
| Flow Rate @ 5 ft of Head (Maximum) | 117 gpm |
| Compatible Motor Frame | 56J NEMA |
| Discharge Pipe Type | NPT |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Duty Cycle | Continuous |
| Viscosity (Maximum) | 260 SUS |
| Shaft Outer Diameter | 7/16 in |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Suction Port | 2 in NPT |
| Discharge Rotation | 90 Degrees Increments |
| Case Pressure (Maximum) | 150 psi |
| Media Temperature (Maximum) | 300 Degrees F |
| Flow Rate @ 60 ft of Head (Maximum) | 24 gpm |
| Intake Pipe Type | NPT |
| Flow Rate @ 15 ft of Head (Maximum) | 106 gpm |
| Wetted Material | 316 Stainless Steel, Carbon, Ceramic, Viton |
| For Use With Potable Systems | No |
| Discharge Port | 1 1/2 in NPT |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 30 ft of Head (Maximum) | 92 gpm |
| Flow Rate (Maximum) | 130 gpm |
| Current | 4.0 or 2.0 A |
| Flow Rate @ 25 ft of Head (Maximum) | 100 gpm |
| Best Efficiency Flow | 55 gpm |
| Shut Off Pressure (Maximum) | 150 psi |
| Media Temperature (Minimum) | 40 Degrees F |
| Priming | Manual |
| Discharge Pipe Size | 1 1/2 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, Centrifugal, SS, 2 HP, 3 PH, DAYTON, Mfr# 5WXT9
-$111.5 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 68 ft, Flow Rate (Maximum) 130 gpm, Horsepower (Maximum) 2 hp, Housing Material 316 Stainless Steel, Impeller Design Closed, Impeller Material 316 Stainless Steel, Intake Pipe Size 2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 300 Degrees F, Phase Three, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 260 SUS, Flow Rate @ 10 ft of Head (Maximum) 114 gpm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.