| Item | Centrifugal Pump |
| HP | 1/30 hp |
| Voltage | 115V |
| Full Load Amps | 2.73 A |
| Cord Length | 6 ft |
| Impeller Material | Acetal |
| Duty | Intermittent |
| Seal Material | Viton |
| Width | 4 1/4 in |
| GPH of Water @ 5 Ft. of Head | 467 |
| GPH of Water @ 1 Ft. of Head | 530 |
| Overload Protection | Thermal |
| Outlet | 1/2 in (M)NPT |
| Inlet Type | Screened |
| GPH of Water @ 10 Ft. of Head | 395 |
| Length | 5 3/32 in |
| Agency Compliance | UL and CSA |
| Inlet | Screened |
| Height | 4 9/32 in |
| Hz | 60 |
| Housing Material | Acetal |
| Amps | 2.73 A |
| Features | Thermoplastic Motor Housing Handles Water with a Higher Mineral Content |
| Frequency | 60 Hz |
| Overall Length | 5.1 in |
| Horsepower | 1/30 hp |
| Compatible Discharge Pipe Size | 1/2 in |
| Intake Type | Screened |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Maximum Feet of Head | 18 ft |
| Pump Housing Material | Plastic |
| Compatible Intake Pipe Size | Not Applicable |
| Maximum RPM | 3,400 RPM |
| Maximum Flow Rate | 530 gph |
| Electrical Connection Type | Plug-In |
| Duty Cycle | Continuous |
| Overall Width | 4.3 in |
| Flow Rate @ 10 ft of Head (Maximum) | 395 gph |
| Intake and Discharge Size | 1/2 in |
| Thermal Overload Protection | Yes |
| Feet of Head (Minimum) | 1 ft |
| Compatible with Media Type | Oil |
| Pumping Application | Condensate Removal and Mache Coolant Recirculation, Displays, Evaporative Coolers, Fountains, Vaporizers |
| Flow Rate @ 5 ft of Head (Maximum) | 467 gph |
| Motor Sealing | Epoxy Encapsulated |
| Standards | CSA Certified, UL Listed |
| Discharge Type | NPT |
| Nameplate Voltage | 115V AC |
| Flow Rate @ 1 ft of Head (Maximum) | 530 gph |
| Overall Height | 4.3 in |
| Compatible Discharge Hose Size | 1/2 in |
| RPM (Maximum) | 3,400 RPM |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, Compact Submersible, 1/20 HP, DAYTON, Mfr# 2HNN9
$159,99
-2% / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Pump Housing Material Plastic, Horsepower 1/30 hp, Nameplate Voltage 115V AC, Flow Rate @ 1 ft of Head (Maximum) 530 gph, Flow Rate @ 5 ft of Head (Maximum) 467 gph, Flow Rate @ 10 ft of Head (Maximum) 395 gph, Maximum Feet of Head 18 ft, Compatible Intake Pipe Size Not Applicable, Compatible Discharge Pipe Size 1/2 in, Intake Type Screened, Discharge Type NPT, Cord Length 6 ft, Motor Sealing Epoxy Encapsulated, Amps 2.73 A, Compatible with Media Type Oil, Duty Cycle Continuous
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.