| Item | Machine Tool Pump |
| HP | 1/8 hp |
| Phase | Three |
| Voltage | 230 |
| Min. Immersion Depth (In.) | 2 in |
| Max. Immersion Depth (In.) | 6 3/8 in |
| Impeller Material | Stainless Steel |
| Body Material | Cast iron |
| Max. Recommended Viscosity | 500 SSU |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Height (In.) | 14 1/16 in |
| GPM of Oil 500 SSU @ 6 Ft. of Head | 4.4 gpm |
| GPM of Water @ 9 Ft. of Head | 4.6 gpm |
| GPH of Water @ 8 Ft. of Head | 388 gph |
| GPH of Water @ 9 Ft. of Head | 276 gph |
| GPM of Water @ 5 Ft. of Head | 9.8 gpm |
| GPH of Water @ 2 Ft. of Head | 717 gph |
| Shut-Off (Ft.) | 10 ft |
| Motor Type | 3 Phase |
| Length (In.) | 5 13/16 in |
| Shaft Seal | Nitrile Butadiene Rubber |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| GPM of Oil 500 SSU @ 12 Ft. of Head | 30 |
| RPM | 1,750 RPM |
| GPH of Water @ 3 Ft. of Head | 677 gph |
| Dia. (In.) | 5 9/16 in |
| Amps | 0.40 |
| GPM of Oil 500 SSU @ 3 Ft. of Head | 8 gpm |
| Width (In.) | 5 1/2 in |
| Shaft Material | Stainless Steel |
| Type | Coolant |
| GPH of Water @ 5 Ft. of Head | 588 gph |
| Max. Temp. | 200 Degrees F |
| GPM of Water @ 3 Ft. of Head | 11.3 gpm |
| GPH of Water @ 1 Ft. of Head | 750 gph |
| GPM of Water @ 7 Ft. of Head Low | 7.8 gpm |
| Discharge Port (In.) | 3/4 in |
| GPM of Water @ 1 Ft. of Head | 12.5 gpm |
| Nominal Tank Depth (In.) | 8 in |
| GPM of Water @ 6 Ft. of Head | 9 gpm |
| Inlet/Outlet (In.) | 3/4 in |
| GPM of Oil 500 SSU @ 15 Ft. of Head | 32 |
| Application | For Machining Lubricants, Coolants, Flushing and Circulation |
| Overall Width | 5.5 in |
| Overall Height | 14.06 in |
| Overall Length | 5.81 in |
| Immersion Depth (Maximum) | 6.38 in |
| Flow Rate (Maximum, Water) | 12.5 gpm |
| Pump Housing Material | Cast Iron |
| Flow Rate @ 15 ft of Head (Maximum, Oil) | Not Applicable |
| Cord Length | Not Applicable |
| Flow Rate @ 5 ft of Head (Maximum, Oil) | Not Applicable |
| Intake and Discharge Size | 3/4 in , 3/4 in |
| Discharge Type | NPT |
| Maximum Viscosity | 500 SUS |
| Feet of Head (Minimum) | 1 ft |
| Intake Type | NPT |
| Electrical Connection Type | Hardwired |
| Horsepower | 1/8 hp |
| Flow Rate @ 10 ft of Head (Maximum, Oil) | Not Applicable |
| Compatible Discharge Pipe Size | 3/4 in |
| Minimum Immersion Depth | 2 in |
| Flow Rate @ 1 ft of Head (Maximum, Oil) | 12.5 gpm |
| Compatible with Media Type | Non-Flammable Liquids |
| Maximum Feet of Head | 10 ft |
| Maximum RPM | 1,750 RPM |
| Base Diameter | 5.56 in |
| Maximum Media Temperature | 200 Degrees F |
| Flow Rate @ 1 ft of Head (Maximum, Water) | 12.5 gpm |
| Seal Material | Nitrile Rubber |
| Flow Rate @ 20 ft of Head (Maximum, Water) | Not Applicable |
| Flow Rate @ 10 ft of Head (Maximum, Water) | 4 gpm |
| Flow Rate @ 20 ft of Head (Maximum, Oil) | Not Applicable |
| Flow Rate @ 15 ft of Head (Maximum, Water) | Not Applicable |
| Nameplate Voltage | 230V AC |
| Flow Rate @ 5 ft of Head (Maximum, Water) | 9.8 gpm |
| Compatible Intake Pipe Size | 3/4 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, Coolant, 1/8 HP, 230V, 0.4 Amp, DAYTON, Mfr# 4JPH4
$397,99
-$397.99 / ea
with subscription
Free shipping will be applied on orders over $50
Machine Tool Pump, Nameplate Voltage 230V AC, Phase Three, Pump Housing Material Cast Iron, Horsepower 1/8 hp, Maximum Viscosity 500 SUS, Flow Rate (Maximum, Water) 12.5 gpm, Flow Rate @ 5 ft of Head (Maximum, Water) 9.8 gpm, Flow Rate @ 10 ft of Head (Maximum, Water) 4 gpm, Maximum Feet of Head 10 ft, Immersion Depth (Maximum) 6.38 in, Compatible Intake Pipe Size 3/4 in, Compatible Discharge Pipe Size 3/4 in, Intake Type NPT, Discharge Type NPT, Impeller Material Stainless Steel
9999 in stock
Must order in multiples of 1
Subtotal:
$397.99
You must be logged in to post a review.
Reviews
There are no reviews yet.