Item | Submersible Pump Motor |
Phase | Single |
HP | 1/2 |
Voltage | 115V AC |
Number of Wires | 2 |
RPM Range | 1,725-3,450 |
Motor Service Factor | 1.15 |
Motor Bearings | Kingsbury |
Nameplate RPM | 3,450 |
Overload Relay Amp Setting | 10.0 A |
Stator Type | Hermetically Sealed |
Motor Enclosure Design | Hermetically Sealed |
Max. Ambient Temp. | 86 Degrees F |
Starter Required | No |
Thrust Rating | 300 lb |
Motor Sub Application | Water Wells |
Motor Shaft Rotation | CCW |
Diaphragm Type | Pressure Equalizing |
Height | 11 in |
Overload Relay Required | No |
Motor Application | Pumps |
Full Load Amps | 10.0 |
Overload Relay Max. Amp Setting | 12 A |
Max. SF Amps | 12 |
Shaft Material | Nitrile Rubber |
Hz | 60 Hz |
Motor Design | Split-Phase |
Motor Thermal Protection | Built-In Lightning Arrestor |
Lead Length | 4 ft |
Standards | ANSI/NSF 61 |
Frame | Not Applicable |
Weight | 19 lb |
Regreasable Bearings | Not Applicable |
NEMA Design | Not Applicable |
Inverter Rating | Not Applicable |
Duty Cycle | Continuous |
Conduit Box Position | Not Applicable |
CC Number | Not Applicable |
Motor Mounting Position | Vertical Shaft Up |
No. of Speeds | Not Applicable |
Resilient Ring Dia. | Not Applicable |
Ins. Class | B |
Part Winding Start Capable | No |
Bolt Circle Dia. | 2 7/8 in |
Shaft Dia. | 5/8 in |
Motor Mounting Type | NEMA Pump Mounting |
Nominal Efficiency | 56 % |
Bearing Protection | Not Applicable |
Motor Frame Material | Stainless Steel |
Manufacturers Warranty Length | 1 yr |
Shaft Length | 10 1/8 in |
Conduit Box Location | Not Applicable |
Body Dia. | 3.8 in |
Ring to Ring Center | Not Applicable |
Finish | Not Applicable |
Motor Shaft Design | Splined |
Overall Length | 9 1/2 in |
Inverter Rated | No |
Length Less Shaft | 9 1/2 in |
Includes | Not Applicable |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Pump Motor, 10A Full Load, 10-1/8" Shaft L, LITTLE GIANT PUMP, Mfr# 2445049004GS
$534,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 10.0, Height 11 in, HP 1/2, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 9 1/2 in
0 in stock
Must order in multiples of 1
Subtotal:
$534.99
You must be logged in to post a review.
Reviews
There are no reviews yet.