Item | Submersible Pump Motor |
Phase | Single |
HP | 2 |
Voltage | 230V AC |
Number of Wires | 3 |
RPM Range | 1,725-3,450 |
Motor Service Factor | 1.15 |
Motor Bearings | Kingsbury |
Nameplate RPM | 3,450 |
Starter Required | No |
Max. SF Amps | 13.2 |
Standards | ANSI/NSF 61 |
Overload Relay Required | No |
Motor Design | Capacitor-Start/Run |
Overload Relay Max. Amp Setting | 12 A |
Shaft Material | Nitrile Rubber |
Motor Sub Application | Water Wells |
Lead Length | 4 ft |
Motor Shaft Rotation | CCW |
Stator Type | Hermetically Sealed |
Motor Thermal Protection | Built-In Lightning Arrestor |
Overload Relay Amp Setting | 10.0 A |
Max. Ambient Temp. | 86 Degrees F |
Thrust Rating | 650 lb |
Height | 16 5/8 in |
Diaphragm Type | Pressure Equalizing |
Motor Application | Pumps |
Hz | 60 Hz |
Full Load Amps | 10.0 |
Motor Enclosure Design | Hermetically Sealed |
Shaft Dia. | 5/8 in |
Length Less Shaft | 15 1/8 in |
Ring to Ring Center | Not Applicable |
Inverter Rating | Not Applicable |
No. of Speeds | Not Applicable |
Conduit Box Location | Not Applicable |
Inverter Rated | No |
Duty Cycle | Continuous |
Overall Length | 15 1/8 in |
Bearing Protection | Not Applicable |
Motor Mounting Type | NEMA Pump Mounting |
Motor Mounting Position | Vertical Shaft Up |
Manufacturers Warranty Length | 1 yr |
NEMA Design | Not Applicable |
Shaft Length | 14 7/8 in |
Ins. Class | B |
Weight | 33 lb |
Resilient Ring Dia. | Not Applicable |
Bolt Circle Dia. | 2 7/8 in |
Nominal Efficiency | 75 % |
CC Number | Not Applicable |
Regreasable Bearings | Not Applicable |
Motor Shaft Design | Splined |
Includes | Not Applicable |
Part Winding Start Capable | No |
Frame | Not Applicable |
Finish | Not Applicable |
Body Dia. | 3.8 in |
Motor Frame Material | Stainless Steel |
Conduit Box Position | Not Applicable |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Pump Motor, 10A Full Load, 14-7/8" Shaft L, LITTLE GIANT PUMP, Mfr# 2243019204GS
$821,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 10.0, Height 16 5/8 in, HP 2, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 15 1/8 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.