Item | Submersible Pump Motor |
Phase | Three |
HP | 2 |
Voltage | 380V AC, 400V AC, 415V AC, 460V AC |
Number of Wires | 3 |
RPM Range | 1,725-3,450 |
Motor Service Factor | 1.15 |
Motor Bearings | Kingsbury |
Nameplate RPM | 3,450 |
Stator Type | Hermetically Sealed |
Motor Enclosure Design | Hermetically Sealed |
Starter Required | No |
Overload Relay Max. Amp Setting | 4.1 A |
Motor Application | Pumps |
Motor Design | 3-Phase |
Hz | 50/60 |
Max. Ambient Temp. | 86 Degrees F |
Diaphragm Type | Pressure Equalizing |
Lead Length | 4 ft |
Overload Relay Amp Setting | 3.4 A |
Thrust Rating | 650 lb |
Shaft Material | Nitrile Rubber |
Motor Sub Application | Water Wells |
Motor Shaft Rotation | CCW |
Height | 15 1/8 in |
Standards | ANSI/NSF 61 |
Overload Relay Required | No |
Full Load Amps | 3.4 |
Motor Thermal Protection | Built-In Lightning Arrestor |
Max. SF Amps | 4.1 |
Inverter Rating | Not Applicable |
Motor Mounting Type | NEMA Pump Mounting |
Ring to Ring Center | Not Applicable |
Conduit Box Location | Not Applicable |
Motor Shaft Design | Splined |
No. of Speeds | Not Applicable |
Motor Frame Material | Stainless Steel |
Bolt Circle Dia. | 2 7/8 in |
Motor Mounting Position | Vertical Shaft Up |
Conduit Box Position | Not Applicable |
Ins. Class | B |
Shaft Dia. | 5/8 in |
CC Number | Not Applicable |
Overall Length | 13 5/8 in |
Duty Cycle | Continuous |
Part Winding Start Capable | No |
Inverter Rated | No |
Resilient Ring Dia. | Not Applicable |
NEMA Design | Not Applicable |
Manufacturers Warranty Length | 1 yr |
Bearing Protection | Not Applicable |
Finish | Not Applicable |
Frame | Not Applicable |
Nominal Efficiency | 77 % |
Weight | 33 lb |
Includes | Not Applicable |
Shaft Length | 14 1/8 in |
Length Less Shaft | 13 5/8 in |
Regreasable Bearings | Not Applicable |
Body Dia. | 3.8 in |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Pump Motor, 3.4A Full Load, 14-1/8"Shaft L, LITTLE GIANT PUMP, Mfr# 2343259404GS
$734,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 50/60, Full Load Amps 3.4, Height 15 1/8 in, HP 2, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 13 5/8 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.