Item | Submersible Pump Motor |
Phase | Single |
HP | 1/3 |
Voltage | 115V AC |
Number of Wires | 3 |
RPM Range | 1,725-3,450 |
Motor Service Factor | 1.15 |
Motor Bearings | Kingsbury |
Nameplate RPM | 3,450 |
Motor Enclosure Design | Hermetically Sealed |
Lead Length | 4 ft |
Motor Shaft Rotation | CCW |
Diaphragm Type | Pressure Equalizing |
Stator Type | Hermetically Sealed |
Full Load Amps | 8.0 |
Motor Thermal Protection | Built-In Lightning Arrestor |
Standards | ANSI/NSF 61 |
Shaft Material | Nitrile Rubber |
Overload Relay Required | No |
Motor Sub Application | Water Wells |
Hz | 60 Hz |
Motor Application | Pumps |
Overload Relay Amp Setting | 10.0 A |
Thrust Rating | 300 lb |
Max. Ambient Temp. | 86 Degrees F |
Overload Relay Max. Amp Setting | 12 A |
Motor Design | Capacitor-Start/Run |
Max. SF Amps | 9.2 |
Starter Required | No |
Height | 10 1/4 in |
Manufacturers Warranty Length | 1 yr |
Shaft Length | 9 1/2 in |
No. of Speeds | Not Applicable |
Length Less Shaft | 8 3/4 in |
Frame | Not Applicable |
Nominal Efficiency | 50 % |
Includes | Not Applicable |
Part Winding Start Capable | No |
Duty Cycle | Continuous |
Inverter Rated | No |
Overall Length | 8 3/4 in |
Motor Mounting Position | Vertical Shaft Up |
Resilient Ring Dia. | Not Applicable |
Inverter Rating | Not Applicable |
Body Dia. | 3.8 in |
Weight | 17 lb |
Bearing Protection | Not Applicable |
NEMA Design | Not Applicable |
Conduit Box Position | Not Applicable |
Shaft Dia. | 5/8 in |
Bolt Circle Dia. | 2 7/8 in |
Motor Frame Material | Stainless Steel |
Motor Shaft Design | Splined |
Motor Mounting Type | NEMA Pump Mounting |
Ins. Class | B |
Finish | Not Applicable |
Regreasable Bearings | Not Applicable |
CC Number | Not Applicable |
Ring to Ring Center | Not Applicable |
Conduit Box Location | Not Applicable |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Pump Motor, 8A Full Load, 9-1/2" Shaft L, LITTLE GIANT PUMP, Mfr# 2145029004GS
$698,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 8.0, Height 10 1/4 in, HP 1/3, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 8 3/4 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.