Item | Submersible Pump Motor |
Phase | Single |
HP | 1/3 |
Voltage | 115V AC |
Number of Wires | 2 |
RPM Range | 1,725-3,450 |
Motor Service Factor | 1.15 |
Motor Bearings | Kingsbury |
Nameplate RPM | 3,450 |
Max. SF Amps | 9.2 |
Overload Relay Max. Amp Setting | 12 A |
Max. Ambient Temp. | 86 Degrees F |
Motor Enclosure Design | Hermetically Sealed |
Motor Shaft Rotation | CCW |
Lead Length | 4 ft |
Shaft Material | Nitrile Rubber |
Motor Sub Application | Water Wells |
Overload Relay Required | No |
Motor Design | Split-Phase |
Thrust Rating | 300 lb |
Standards | ANSI/NSF 61 |
Motor Thermal Protection | Built-In Lightning Arrestor |
Height | 10 1/4 in |
Full Load Amps | 8.0 |
Diaphragm Type | Pressure Equalizing |
Motor Application | Pumps |
Stator Type | Hermetically Sealed |
Hz | 60 Hz |
Overload Relay Amp Setting | 10.0 A |
Starter Required | No |
Motor Mounting Position | Vertical Shaft Up |
Motor Frame Material | Stainless Steel |
CC Number | Not Applicable |
Finish | Not Applicable |
Includes | Not Applicable |
Regreasable Bearings | Not Applicable |
Motor Shaft Design | Splined |
No. of Speeds | Not Applicable |
Length Less Shaft | 8 3/4 in |
Inverter Rated | No |
Nominal Efficiency | 51 % |
Bearing Protection | Not Applicable |
Frame | Not Applicable |
Duty Cycle | Continuous |
Conduit Box Location | Not Applicable |
Shaft Dia. | 5/8 in |
NEMA Design | Not Applicable |
Conduit Box Position | Not Applicable |
Weight | 17 lb |
Overall Length | 8 3/4 in |
Resilient Ring Dia. | Not Applicable |
Body Dia. | 3.8 in |
Motor Mounting Type | NEMA Pump Mounting |
Inverter Rating | Not Applicable |
Shaft Length | 9 1/2 in |
Manufacturers Warranty Length | 1 yr |
Ins. Class | B |
Ring to Ring Center | Not Applicable |
Part Winding Start Capable | No |
Bolt Circle Dia. | 2 7/8 in |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Pump Motor, 8A Full Load, 9-1/2" Shaft L, LITTLE GIANT PUMP, Mfr# 2445029004GS
$537,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 8.0, Height 10 1/4 in, HP 1/3, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 8 3/4 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.