| Item | Pump |
| HP | 1 1/2 hp |
| Voltage | 115/230 |
| Amps | 14.2/7.1 |
| Motor Enclosure | Open Dripproof |
| NEMA Motor Frame | 56YZ |
| Inlet/Outlet (In.) | 1-1/2 NPT |
| Max. Head (Ft.) | 92 ft |
| Max. Pressure (PSI) | 39.8 psi |
| Max. SSU @ 1725 RPM | 5,000 SUS |
| Length (In.) | 17 93/100 in |
| Impeller Material | Buna-N |
| GPM of Water @ 10 Ft. of Head | 28 gpm |
| Motor Type | ODP |
| Cord Length | Not Applicable |
| Temp. Range (F) | 0 to 180 |
| RPM | 1,725 RPM |
| GPM of Water @ 40 Ft. of Head | 19 gpm |
| GPM of Water @ 60 Ft. of Head | 16 gpm |
| Prime in Feet | 10 Feet and 15 Feet with Foot Valve and Pumps Flooded |
| Self-Priming | Yes |
| GPM of Water @ 30 Ft. of Head | 22 gpm |
| Application | Pumps are used in a wide range of commercial, industrial, and agricultural applications where non-abrasive fluids compatible with the pump component materials are being used. |
| Includes | Carrying Handle, Manual |
| Housing Material | Stainless Steel |
| Suction Lift (Ft.) | 10 |
| Shaft Material | Stainless Steel |
| Width (In.) | 6 3/5 in |
| Max. Viscosity | 5,000 SUS |
| Seal | Nitrile Lip |
| GPM of Water @ 20 Ft. of Head | 26 gpm |
| Type | Flexible Impeller |
| Height (In.) | 10 7/10 in |
| Characteristics | Positive Displacement Pumping Action Without Metal-to-Metal Contact. |
| Overall Length | 17.9 in |
| Overall Width | 6.5 in |
| Overall Height | 10.7 in |
| Operating Pressure - Maximum | 39.8 psi |
| Phase | Single |
| Motor Speed - Maximum | 1,725 RPM |
| Horsepower - Maximum | 1 1/2 hp |
| Media Intake Connection Type | FNPT |
| Discharge Connection Type | FNPT |
| Bearing Type | Ball |
| Media Temperature - Minimum | 32 Degrees F |
| Feet of Head - Maximum | 92 ft of head |
| Frequency | 60 Hz |
| Flow Rate @ 60 ft of Head - Maximum | 16 gpm |
| Seal Material | Buna-N |
| Motor Mounting Type | Horizontal |
| Seal Type | Lip |
| Impeller Diameter | 2 5/8 in |
| Flow Rate @ 30 ft of Head - Maximum | 22 gpm |
| Suction Lift - Maximum | 10 ft |
| Priming | Self-Priming |
| Shaft Outer Diameter | 5/8 in |
| Media Temperature - Maximum | 180 Degrees F |
| Wetted Material | Buna-N, Stainless Steel |
| Flow Rate @ 40 ft of Head - Maximum | 19 gpm |
| Discharge Connection Size | 1 1/2 in |
| For Media Type | Hydraulic Fluids, Petroleum Oils, Silicone Grease |
| Current | 14.2 A |
| Flow Rate @ 10 ft of Head - Maximum | 28 gpm |
| Bearing Material | Stainless Steel |
| Viscosity - Maximum | 5,000 SUS |
| Compatible Motor Frame | 56YZ |
| Flow Rate @ 50 ft of Head - Maximum | 17.8 gpm |
| Nameplate Voltage | 115 to 230V AC |
| Flow Rate @ 1 ft of Head - Maximum | 29 gpm |
| Media Intake Connection Size | 1 1/2 in |
| Flow Rate @ 20 ft of Head - Maximum | 26 gpm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, SS, 1 1/2 HP, 115/230V, 18.6/9.3 Amps, DAYTON, Mfr# 3ACC8
$2565,99
Free shipping will be applied on orders over $50
Pump, Housing Material Stainless Steel, Horsepower - Maximum 1 1/2 hp, Nameplate Voltage 115 to 230V AC, Flow Rate @ 10 ft of Head - Maximum 28 gpm, Viscosity - Maximum 5,000 SUS, Feet of Head - Maximum 92 ft of head, Discharge Connection Size 1 1/2 in, Media Intake Connection Size 1 1/2 in, Media Intake Connection Type FNPT, Impeller Material Buna-N, Discharge Connection Type FNPT, Cord Length Not Applicable, Priming Self-Priming, Operating Pressure - Maximum 39.8 psi
0 in stock
Must order in multiples of 1
Subtotal:
$2565.99
You must be logged in to post a review.
Reviews
There are no reviews yet.