| Item | Machine Tool Pump |
| HP | 1/2 hp |
| Phase | Three |
| Voltage | 230/460 |
| Min. Immersion Depth (In.) | 3 in |
| Max. Immersion Depth (In.) | 12 1/4 in |
| Impeller Material | Stainless Steel |
| Body Material | Cast iron |
| Max. Recommended Viscosity | 500 SSU |
| GPM of Oil 500 SSU @ 18 Ft. of Head | 20.3 gpm |
| GPH of Water @ 8 Ft. of Head | 3,980 gph |
| GPM of Water @ 1 Ft. of Head | 74 gpm |
| Amps | 1.77/0.89 |
| GPM of Water @ 21 Ft. of Head | 33.8 gpm |
| Length (In.) | 11 13/16 in |
| Inlet/Outlet (In.) | 1 1/2 in |
| GPM of Oil 500 SSU @ 9 Ft. of Head | 41.2 gpm |
| GPM of Water @ 18 Ft. of Head | 45 gpm |
| GPH of Water @ 2 Ft. of Head | 4,400 gph |
| Width (In.) | 10 3/16 in |
| GPM of Water @ 20 Ft. of Head | 38.2 gpm |
| Elastomer | NBR |
| Max. Temp. | 200 Degrees F |
| GPM of Oil 500 SSU @ 6 Ft. of Head | 47.2 gpm |
| Discharge Port (In.) | 1 1/2 in |
| GPM of Water @ 15 Ft. of Head | 53 gpm |
| GPH of Water @ 10 Ft. of Head | 3,780 gph |
| GPM of Oil 500 SSU @ 15 Ft. of Head | 26.8 gpm |
| GPH of Water @ 3 Ft. of Head | 4,340 gph |
| GPH of Water @ 9 Ft. of Head | 3,890 gph |
| Shaft Seal | Nitrile Butadiene Rubber |
| GPM of Water @ 3 Ft. of Head | 72.3 gpm |
| Nominal Tank Depth (In.) | 14 in |
| Type | Coolant |
| GPM of Oil 500 SSU @ 21 Ft. of Head | 13.3 gpm |
| GPM of Water @ 13 Ft. of Head Low | 57.5 gpm |
| Replaces Graymills Model | TN33 |
| GPM of Water @ 16 Ft. of Head | 50.5 gpm |
| GPM of Water @ 9 Ft. of Head | 64.8 gpm |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Application | For Machining Lubricants, Coolants, Flushing and Circulation |
| GPM of Water @ 23 Ft. of Head | 23 gpm |
| GPM of Oil 500 SSU @ 12 Ft. of Head | 34.5 gpm |
| Shaft Material | Carbon Steel |
| GPM of Water @ 6 Ft. of Head | 69.2 gpm |
| RPM | 1,750 RPM |
| GPH of Water @ 1 Ft. of Head | 4,440 gph |
| GPM of Water @ 12 Ft. of Head | 59.3 gpm |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| GPM of Water @ 7 Ft. of Head Low | 67.8 gpm |
| GPM of Water @ 24 Ft. of Head | 16.3 gpm |
| Shut-Off (Ft.) | 26.2 ft |
| GPM of Water @ 5 Ft. of Head | 70.3 gpm |
| GPH of Water @ 5 Ft. of Head | 4,220 gph |
| Motor Type | 3-Phase |
| GPM of Oil 500 SSU @ 3 Ft. of Head | 53 gpm |
| GPM of Water @ 10 Ft. of Head | 63 gpm |
| Height (In.) | 25 11/16 in |
| Dia. (In.) | 9 1/4 in |
| Overall Width | 10.19 in |
| Overall Height | 25.69 in |
| Overall Length | 11.81 in |
| Maximum Viscosity | 500 SUS |
| Electrical Connection Type | Hardwired |
| Minimum Immersion Depth | 3 in |
| Flow Rate (Maximum, Water) | 74 gpm |
| Maximum Feet of Head | 26.2 ft |
| Flow Rate @ 15 ft of Head (Maximum, Water) | 53 gpm |
| Maximum Media Temperature | 200 Degrees F |
| Flow Rate @ 1 ft of Head (Maximum, Oil) | 74 gpm |
| Pump Housing Material | Cast Iron |
| Manufacturer Warranty Length | Limited Warranty |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Compatible with Media Type | Non-Flammable Liquids |
| Feet of Head (Minimum) | 1 ft |
| Flow Rate @ 5 ft of Head (Maximum, Water) | 70.3 gpm |
| Operation | Manual |
| Flow Rate @ 5 ft of Head (Maximum, Oil) | Not Applicable |
| Intake Type | NPT |
| Intake and Discharge Size | 1 1/2 in , 1 1/2 in |
| Compatible Intake Pipe Size | 1 1/2 in |
| Horsepower | 1/2 hp |
| Flow Rate @ 20 ft of Head (Maximum, Water) | 38.2 gpm |
| Base Diameter | 9.25 in |
| Compatible Discharge Pipe Size | 1 1/2 in |
| Nameplate Voltage | 230/460V AC |
| Flow Rate @ 1 ft of Head (Maximum, Water) | 74 gpm |
| Cord Length | Not Applicable |
| Flow Rate @ 15 ft of Head (Maximum, Oil) | 26.8 gpm |
| Seal Material | Nitrile Rubber |
| Discharge Type | NPT |
| Flow Rate @ 20 ft of Head (Maximum, Oil) | Not Applicable |
| Immersion Depth (Maximum) | 12.25 in |
| Minimum Media Temperature | 40 Degrees F |
| Flow Rate @ 10 ft of Head (Maximum, Water) | 63 gpm |
| Frequency | 60 Hz |
| Flow Rate @ 10 ft of Head (Maximum, Oil) | Not Applicable |
| Duty Cycle | Continuous |
| Maximum RPM | 1,750 RPM |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, Coolant, 1/2HP, 230/460V, 1.77/0.89Amp, DAYTON, Mfr# 4JPH8
$797,99
-$23.94 / ea
with subscription
Free shipping will be applied on orders over $50
Machine Tool Pump, Nameplate Voltage 230/460V AC, Phase Three, Pump Housing Material Cast Iron, Horsepower 1/2 hp, Maximum Viscosity 500 SUS, Flow Rate (Maximum, Water) 74 gpm, Flow Rate @ 5 ft of Head (Maximum, Water) 70.3 gpm, Flow Rate @ 10 ft of Head (Maximum, Water) 63 gpm, Flow Rate @ 15 ft of Head (Maximum, Water) 53 gpm, Maximum Feet of Head 26.2 ft, Immersion Depth (Maximum) 12.25 in, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/2 in, Intake Type NPT
9999 in stock
Must order in multiples of 1
Subtotal:
$797.99
You must be logged in to post a review.
Reviews
There are no reviews yet.