| Item | Machine Tool Pump |
| HP | 1/3 hp |
| Phase | Three |
| Voltage | 230/460 |
| Min. Immersion Depth (In.) | 2 in |
| Max. Immersion Depth (In.) | 6 3/8 in |
| Impeller Material | Stainless Steel |
| Body Material | Cast iron |
| Max. Recommended Viscosity | 500 SSU |
| GPM of Water @ 18 Ft. of Head | 20.2 gpm |
| Type | Coolant |
| GPM of Water @ 3 Ft. of Head | 56 gpm |
| GPM of Oil 500 SSU @ 18 Ft. of Head | 11.2 gpm |
| RPM | 1,750 RPM |
| GPH of Water @ 8 Ft. of Head | 2,970 gph |
| Max. Temp. | 200 Degrees F |
| GPM of Water @ 9 Ft. of Head | 47.3 gpm |
| Discharge Port (In.) | 1 1/4 in |
| Shaft Seal | Nitrile Butadiene Rubber |
| GPM of Water @ 13 Ft. of Head Low | 38.5 gpm |
| Shut-Off (Ft.) | 21.3 ft |
| GPM of Water @ 15 Ft. of Head | 32.5 gpm |
| GPM of Oil 500 SSU @ 6 Ft. of Head | 34 gpm |
| Width (In.) | 8 7/16 in |
| Shaft Material | Carbon Steel |
| Elastomer | NBR |
| Inlet/Outlet (In.) | 1 1/4 in |
| GPH of Water @ 3 Ft. of Head | 3,360 gph |
| GPM of Water @ 21 Ft. of Head | 2.4 gpm |
| Nominal Tank Depth (In.) | 8 in |
| Motor Type | 3-Phase |
| Dia. (In.) | 8 3/8 in |
| Length (In.) | 11 in |
| GPH of Water @ 1 Ft. of Head | 3,456 gph |
| GPM of Water @ 16 Ft. of Head | 29 gpm |
| GPM of Water @ 1 Ft. of Head | 57.6 gpm |
| GPH of Water @ 2 Ft. of Head | 3,408 gph |
| GPH of Water @ 9 Ft. of Head | 2,838 gph |
| GPM of Oil 500 SSU @ 15 Ft. of Head | 17 gpm |
| Application | For Machining Lubricants, Coolants, Flushing and Circulation |
| GPM of Water @ 10 Ft. of Head | 45.5 gpm |
| Height (In.) | 19 7/16 in |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| GPM of Water @ 6 Ft. of Head | 53 gpm |
| GPM of Water @ 20 Ft. of Head | 8.8 gpm |
| GPM of Water @ 5 Ft. of Head | 54 gpm |
| GPM of Oil 500 SSU @ 12 Ft. of Head | 23.3 gpm |
| GPM of Oil 500 SSU @ 3 Ft. of Head | 41 gpm |
| Amps | 1.1/0.56 |
| GPM of Oil 500 SSU @ 9 Ft. of Head | 29 gpm |
| GPM of Water @ 12 Ft. of Head | 41 gpm |
| GPH of Water @ 5 Ft. of Head | 3,240 gph |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| GPH of Water @ 10 Ft. of Head | 2,730 gph |
| GPM of Water @ 7 Ft. of Head Low | 51.4 gpm |
| Overall Length | 11 in |
| Overall Height | 19.44 in |
| Overall Width | 8.44 in |
| Cord Length | Not Applicable |
| Horsepower | 1/3 hp |
| Flow Rate @ 10 ft of Head (Maximum, Oil) | Not Applicable |
| Base Diameter | 8.38 in |
| Electrical Connection Type | Hardwired |
| Flow Rate @ 10 ft of Head (Maximum, Water) | 45.5 gpm |
| Flow Rate @ 5 ft of Head (Maximum, Oil) | Not Applicable |
| Manufacturer Warranty Length | Limited Warranty |
| Flow Rate @ 5 ft of Head (Maximum, Water) | 54 gpm |
| Flow Rate @ 1 ft of Head (Maximum, Water) | 57.6 gpm |
| Flow Rate (Maximum, Water) | 57.6 gpm |
| Compatible Discharge Pipe Size | 1 1/4 in |
| Duty Cycle | Continuous |
| Intake Type | NPT |
| Feet of Head (Minimum) | 3 ft |
| Compatible Intake Pipe Size | 1 1/4 in |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Immersion Depth (Maximum) | 6.38 in |
| Compatible with Media Type | Non-Flammable Liquids |
| Flow Rate @ 1 ft of Head (Maximum, Oil) | 57.6 gpm |
| Flow Rate @ 20 ft of Head (Maximum, Water) | 8.8 gpm |
| Intake and Discharge Size | 1 1/4 in , 1 1/4 in |
| Flow Rate @ 20 ft of Head (Maximum, Oil) | Not Applicable |
| Frequency | 60 Hz |
| Discharge Type | NPT |
| Maximum Feet of Head | 21.3 ft |
| Minimum Immersion Depth | 2 in |
| Minimum Media Temperature | 40 Degrees F |
| Flow Rate @ 15 ft of Head (Maximum, Oil) | 17 gpm |
| Maximum Viscosity | 500 SUS |
| Maximum Media Temperature | 200 Degrees F |
| Seal Material | Nitrile Rubber |
| Operation | Manual |
| Pump Housing Material | Cast Iron |
| Flow Rate @ 15 ft of Head (Maximum, Water) | 32.5 gpm |
| Nameplate Voltage | 230/460V AC |
| Maximum RPM | 1,750 RPM |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, Coolant, 1/3 HP, 230/460V, 1.1/0.56Amp, DAYTON, Mfr# 4JPG7
$750,99
-$22.53 / ea
with subscription
Free shipping will be applied on orders over $50
Machine Tool Pump, Nameplate Voltage 230/460V AC, Phase Three, Pump Housing Material Cast Iron, Horsepower 1/3 hp, Maximum Viscosity 500 SUS, Flow Rate (Maximum, Water) 57.6 gpm, Flow Rate @ 5 ft of Head (Maximum, Water) 54 gpm, Flow Rate @ 10 ft of Head (Maximum, Water) 45.5 gpm, Flow Rate @ 15 ft of Head (Maximum, Water) 32.5 gpm, Maximum Feet of Head 21.3 ft, Immersion Depth (Maximum) 6.38 in, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 1/4 in, Intake Type NPT
9999 in stock
Must order in multiples of 1
Subtotal:
$750.99
You must be logged in to post a review.
Reviews
There are no reviews yet.