| Item | Pressure Plunger Pump |
| Type | Pressure |
| Flow Capacity (GPM) | 18.5 |
| RPM | 1,450 RPM |
| Shaft Dia. | 30 mm |
| Inlet Port (In.) | 1 F |
| Outlet | 1/2 in F |
| Width (In.) | 13.5 in |
| Pump Head | Nickel Plated Brass |
| Crankshaft | Forged Steel |
| Manifold Material | Nickel Plated Brass |
| HP Required @ 1500 PSI | 19.1 hp |
| Driver Type | Solid Shaft |
| Discharge Port (In.) | 1/2 Degrees F |
| Max. Fluid Temp. (F) | 140 |
| Crankcase | Die Cast Aluminum |
| HP Required @ 2000 PSI | 25.4 hp |
| Seal | V Style Chevron and Buna N Lip |
| Plunger | Ceramic |
| Length (In.) | 16 in |
| Bearings | Roller |
| Lubrication | Oil Bath |
| Height (In.) | 7.5 in |
| Application | High Pressure Water |
| Connecting Rod | Aluminum |
| Discharge Pressure (PSI) | 2,000 |
| HP Required @ 500 PSI | 6.4 hp |
| Max. Inlet Pressure (PSI) | 100 |
| HP Required @ 1000 PSI | 12.7 hp |
| Product Type | Pump |
| Flow Rate (Minimum) | 1.7 gpm |
| Shaft | 30 mm Solid |
| Flange Type | Horizontal Plunger Pump |
| Required Electric Motor Horsepower (Maximum) | 25 2/5 hp |
| Hydraulic Motor Pressure @ 500 psi | Not Applicable |
| Piston Design | Triplex |
| Shaft Outer Diameter | 30 mm |
| Connecting Rod Material | Aluminum |
| Plunger Material | Ceramic |
| Overall Width | 13.5 in |
| Hydraulic Motor Pressure @ 1500 psi | Not Applicable |
| Seal Type | Lip, Chevron |
| Discharge Pressure (Maximum) | 2,000 psi |
| Discharge Connection Size | 1/2 in |
| Discharge Port | 1/2 in BSP |
| Discharge Connection Type | BSP |
| Intake Connection Size | 1 in |
| Hydraulic Motor Flow Rate (Maximum) | Not Applicable |
| Number of Pistons | 3 |
| Hydraulic Motor Pressure @ 2000 psi | Not Applicable |
| Flow Rate (Maximum) | 17 gpm |
| Motor Speed (Maximum) | 1,450 RPM |
| Crankshaft Material | Forged Steel |
| Required Gasoline Engine Horsepower (Maximum) | 36 hp |
| Shaft Type | Solid |
| Operating Pressure (Maximum) | 3,000 psi |
| Hydraulic Motor Pressure @ 3000 psi | Not Applicable |
| Suction Port | 1 in BSP |
| Drive Type | Belt-Drive |
| Intake Connection Type | BSP |
| Bearing Type | Roller |
| Hydraulic Motor Pressure @ 1000 psi | Not Applicable |
| Overall Length | 16 in |
| Seal Material | Buna-N |
| Pump Head Material | Nickel Plated Brass |
| Crankcase Material | Die Cast Aluminum |
| Media Temperature (Maximum) | 140 Degrees F |
| Overall Height | 7.5 in |
| Hydraulic Motor Pressure @ 2500 psi | Not Applicable |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 1 |
Pump, Pressure, 18.5 gpm, A.R. NORTH AMERICA, Mfr# RTX70
$2344,99
Free shipping will be applied on orders over $50
Pressure Plunger Pump, Discharge Connection Size 1/2 in, Discharge Connection Type BSP, Discharge Pressure (Maximum) 2,000 psi, Flow Rate (Maximum) 17 gpm, Intake Connection Size 1 in, Intake Connection Type BSP, Motor Speed (Maximum) 1,450 RPM, Piston Design Triplex, Pump Head Material Nickel Plated Brass, Plunger Material Ceramic, Required Electric Motor Horsepower (Maximum) 25 2/5 hp, Required Gasoline Engine Horsepower (Maximum) 36 hp, Lubrication Oil Bath, Shaft Outer Diameter 30 mm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.