| HP | 1/2 hp |
| Voltage | 115/208-230 |
| Wetted Materials | Bronze Fitted, Cast Iron |
| Seal Material | Buna-N/Carbon/Ceramic (Face) |
| Max. Pressure | 300 psi |
| Item | Turbine Pump |
| Max. Dia. Solids | 25 Microns |
| Duty | Continuous |
| Outlet | 1 in |
| Housing Material | Cast iron |
| Phase | Single |
| Inlet (In.) | 1 |
| GPM @ 50 PSI | 5.8 |
| GPM @ 10 PSI | 6.8 |
| Agency Compliance | UL and CSA on Motor Only |
| Max. Case Pressure | 300 psi |
| Bearing Type | Sealed Ball Bearing (Motor Bearing) |
| Inlet Pressure | 200 psi |
| Motor Enclosure | Open Dripproof (ODP) |
| GPM @ 30 PSI | 6.3 |
| Motor Type | Capacitor-Start |
| Height | 6 1/2 in |
| Frame | 56c |
| Best Efficiency GPM @ Head | 4.8 gpm @ 95 psi ft |
| GPM @ 100 PSI | 4.6 |
| GPM @ 60 PSI | 5.6 |
| Inlet | 1 in |
| Width | 6 1/2 in |
| Amps | 9.6/4.8 |
| Impeller Type | Regenerative Turbine |
| GPM @ 20 PSI | 6.6 |
| GPM @ 75 PSI | 5.2 |
| Max. Specific Gravity | 1 |
| Manufacturers Warranty Length | 1 yr |
| Impeller Material | Bronze |
| Includes | Cast Casing |
| Port Rotation | 90 Degrees Increments |
| Overall Width | 6.5 in |
| Standards | CSA Certified (Motor Only), UL Listed (Motor Only) |
| Overall Height | 6.5 in |
| Flow Rate @ 20 psi | 6.6 gpm |
| Pump Housing Material | Cast Iron |
| Flow Rate @ 240 psi | Not Applicable |
| NPSHr | 200 psi |
| Solid Diameter (Maximum) | 25 micron |
| Impeller Design | Regenerative Turbine |
| Maximum Flow Rate | 6.8 gpm |
| Flow Rate @ 15 psi | Not Applicable |
| Flow Rate @ 90 psi | 4.95 gpm |
| Duty Cycle | Continuous |
| Flow Rate @ 40 psi | 6.05 gpm |
| Compatible Discharge Pipe Size | 1 in |
| Shut Off Pressure (Maximum) | 130 psi |
| Flow Rate @ 100 psi | 4.75 gpm |
| Intake Type | NPT |
| Flow Rate @ 70 psi | 5.3 gpm |
| Discharge Type | NPT |
| Flow Rate @ 80 psi | 5.2 gpm |
| Specific Gravity (Maximum) | 1 |
| Horsepower | 1/2 hp |
| Flow Rate @ 160 psi | Not Applicable |
| Flow Rate @ 180 psi | Not Applicable |
| Intake and Discharge Size | 1 in , 1 in |
| Discharge Rotation | 90 Degrees Increments |
| Compatible Intake Pipe Size | 1 in |
| Flow Rate @ 220 psi | Not Applicable |
| Flow Rate @ 120 psi | 4.3 gpm |
| Motor Frame Designation | 56C |
| Minimum Flow Rate | 4.6 gpm |
| Flow Rate @ 260 psi | Not Applicable |
| Wetted Material | Bronze Fitted, Cast Iron |
| Flow Rate @ 10 psi | 6.8 gpm |
| Flow Rate @ 60 psi | 5.6 gpm |
| Motor Enclosure Type | ODP |
| Flow Rate @ 50 psi | 5.85 gpm |
| Seal Type | Type 21 |
| Nameplate Voltage | 115/208-230V AC |
| Flow Rate @ 140 psi | Not Applicable |
| Best Efficiency Head | 95 ft |
| Compatible with Media Type | Water |
| Flow Rate @ 30 psi | 6.3 gpm |
| Flow Rate @ 200 psi | Not Applicable |
| Manufacturer Warranty Length | 1 yr |
| Case Pressure (Maximum) | 300 psi |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pump, Turbine, 1/2 HP, DAYTON, Mfr# 4UP52
$879,99
-$47.74 / ea
with subscription
Free shipping will be applied on orders over $50
Turbine Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1/2 hp, Nameplate Voltage 115/208-230V AC, Shut Off Pressure (Maximum) 130 psi, Maximum Flow Rate 6.8 gpm, Flow Rate @ 10 psi 6.8 gpm, Flow Rate @ 20 psi 6.6 gpm, Flow Rate @ 30 psi 6.3 gpm, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Type Capacitor-Start, Best Efficiency Head 95 ft, Case Pressure (Maximum) 300 psi
9999 in stock
Must order in multiples of 1
Subtotal:
$879.99
You must be logged in to post a review.
Reviews
There are no reviews yet.