| HP | 3 hp |
| Voltage | 208-230/460 |
| Wetted Materials | Bronze Fitted, Cast Iron |
| Seal Material | Buna-N/Carbon/Ceramic (Face) |
| Max. Pressure | 300 psi |
| Bearing Type | Sealed Ball Bearing (Motor Bearing) |
| Impeller Type | Regenerative Turbine |
| Max. Case Pressure | 300 psi |
| Includes | Cast Casing |
| GPM @ 150 PSI | 11.6 |
| GPM @ 10 PSI | 17.0 |
| Inlet | 1-1/4 in |
| GPM @ 100 PSI | 14.4 |
| GPM @ 75 PSI | 15.0 |
| Best Efficiency GPM @ Head | 13.0 gpm @ 130 ft |
| Width | 8 3/8 in |
| Height | 8 3/8 in |
| Outlet | 1 in |
| Item | Turbine Pump |
| Duty | Continuous |
| Impeller Material | Bronze |
| Motor Enclosure | Totally Enclosed Fan Cooled (TEFC) |
| GPM @ 30 PSI | 16.2 |
| Inlet Pressure | 200 psi |
| Phase | Three |
| Agency Compliance | CE & CSA ON MOTOR ONLY, UL |
| Inlet (In.) | 1-1/4 |
| Max. Dia. Solids | 25 Microns |
| Max. Specific Gravity | 1 |
| Housing Material | Cast iron |
| Motor Type | 3-Phase |
| GPM @ 50 PSI | 15.7 |
| GPM @ 20 PSI | 16.7 |
| Frame | 56c |
| Manufacturers Warranty Length | 1 yr |
| GPM @ 60 PSI | 15.4 |
| Port Rotation | 90 Degrees Increments |
| Overall Width | 8.38 in |
| Overall Height | 8.38 in |
| Standards | CE Certified (Motor Only), CSA Certified (Motor Only), UL Listed |
| Case Pressure (Maximum) | 300 psi |
| Flow Rate @ 200 psi | Not Applicable |
| Flow Rate @ 160 psi | Not Applicable |
| Flow Rate @ 240 psi | Not Applicable |
| Compatible with Media Type | Water |
| Seal Type | Type 21 |
| Compatible Intake Pipe Size | 1 1/4 in |
| Operation | Manual |
| Solid Diameter (Maximum) | 25 micron |
| Horsepower | 3 hp |
| Manufacturer Warranty Length | 1 yr |
| Flow Rate @ 120 psi | 13.5 gpm |
| Wetted Material | Bronze Fitted, Cast Iron |
| Flow Rate @ 70 psi | 15 gpm |
| Specific Gravity (Maximum) | 1 |
| NPSHr | 200 psi |
| Flow Rate @ 20 psi | 16.8 gpm |
| Nameplate Voltage | 208-230/460V AC |
| Discharge Type | NPT |
| Flow Rate @ 100 psi | 14.2 gpm |
| Flow Rate @ 180 psi | Not Applicable |
| Thermal Overload Protection | Yes |
| Impeller Design | Regenerative Turbine |
| Flow Rate @ 15 psi | Not Applicable |
| Minimum Media Temperature | -20 Degrees F |
| Discharge Rotation | 90 Degrees Increments |
| Flow Rate @ 90 psi | 14.5 gpm |
| Flow Rate @ 80 psi | 14.8 gpm |
| Best Efficiency Head | 130 ft |
| Minimum Flow Rate | 11.6 gpm |
| Flow Rate @ 60 psi | 15.5 gpm |
| Intake and Discharge Size | 1 1/4 in , 1 in |
| Flow Rate @ 220 psi | Not Applicable |
| Pump Housing Material | Cast Iron |
| Maximum Flow Rate | 17 gpm |
| Intake Type | NPT |
| Shut Off Pressure (Maximum) | 160 psi |
| Motor Enclosure Type | TEFC |
| Compatible Discharge Pipe Size | 1 in |
| Flow Rate @ 40 psi | 16.2 gpm |
| Flow Rate @ 30 psi | 16.5 gpm |
| Duty Cycle | Continuous |
| Flow Rate @ 260 psi | Not Applicable |
| Flow Rate @ 10 psi | 17 gpm |
| Flow Rate @ 50 psi | 15.8 gpm |
| Motor Frame Designation | 56C |
| Flow Rate @ 140 psi | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pump, Turbine, 3 HP, DAYTON, Mfr# 4UP60
$1907,99
-$102.83 / ea
with subscription
Free shipping will be applied on orders over $50
Turbine Pump, Phase Three, Pump Housing Material Cast Iron, Motor Enclosure Totally Enclosed Fan Cooled, Horsepower 3 hp, Nameplate Voltage 208-230/460V AC, Shut Off Pressure (Maximum) 160 psi, Maximum Flow Rate 17 gpm, Flow Rate @ 10 psi 17 gpm, Flow Rate @ 20 psi 16.8 gpm, Flow Rate @ 30 psi 16.5 gpm, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Type 3-Phase, Best Efficiency Head 130 ft, Case Pressure (Maximum) 300 psi
9999 in stock
Must order in multiples of 1
Subtotal:
$1907.99
You must be logged in to post a review.
Reviews
There are no reviews yet.