Shaft Locking Type - Couplings | 1 Piece Clamp |
Item | Rigid Shaft Coupling |
System of Measurement | Inch |
Bore Dia. | 1/4 in |
Material - Couplings | 2024 Aluminum |
Outside Dia. | 5/8 in |
Overall Length | 1 in |
With Keyway / Without Keyway | Without Keyway |
Finish | Bright |
Max. Torque (In.-Lbs.) | 200 |
Design | Four Vibration Resistant Socket Capscrews |
Material | 2024 Aluminum |
Type | One Piece Clamp Type, Without Keyway |
Max. Torque | 200 in-lb |
Screw Size (In.) | #4-40 |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Clearance Dia. (In.) | 0.815 |
Clearance Dia. | 0.815 in |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Machined From | Bar Stock |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Screw Size | #4-40 |
Standards | ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
Bore Tolerance | +0.0020 in / +0.0005 in |
Screw Material | Alloy Steel |
Bore Diameter 2 | 1/4 in |
Clearance Diameter | 0.82 in |
Included Screws | (4) Clamp Screws |
Coupling Material Grade | 2024 |
Coupling Material Finish | Bright |
Minimum Bore Diameter | 1/4 in |
Bore Type | Round |
Zero Backlash | Yes |
Screw Location from Center | 0.219 in |
Coupling Outside Diameter | 5/8 in |
Keyway Width 1 | Not Applicable |
Screw Material Finish | Black Oxide |
Minimum Operating Temperature | -40 Degrees F |
Resistance Properties | Corrosion Resistant |
Keyway Width 2 | Not Applicable |
Keyway Depth 1 | Not Applicable |
Fastener Tightening Torque | 15 lb-in |
Maximum Torque | 190 in-lb |
Different Bore Sizes | No |
Maximum Speed | 4,000 RPM |
Shaft Tolerance | +0.0000 in / -0.0005 in |
Shaft Locking Type | Clamp On |
Maximum Operating Temperature | 225 Degrees F |
Keyway Depth 2 | Not Applicable |
Maximum Bore Diameter | 1/4 in |
Recommended Gap | Not Applicable |
Coupling Construction | One-Piece |
Coupling Material | Aluminum |
Screw Thread Size | #4-40 |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Bore Diameter 1 | 1/4 in |
Number of Locking Screws | 4 |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, One Piece, Bore Dia 1/4 In, RULAND, Mfr# CLX-4-4-A
$29,59
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 1/4 in, Bore Diameter 2 1/4 in, Bore Type Round, Clearance Diameter 0.82 in, Coupling Construction One-Piece, Coupling Material Aluminum, Coupling Outside Diameter 5/8 in, Different Bore Sizes No, Keyway Depth 1 Not Applicable, Keyway Depth 2 Not Applicable, Minimum Bore Diameter 1/4 in, Keyway Width 1 Not Applicable, Keyway Width 2 Not Applicable, Maximum Bore Diameter 1/4 in, Maximum Speed 4,000 RPM, Maximum Torque 190 in-lb, Overall Length 1 in
9999 in stock
Must order in multiples of 1
Subtotal:
$29.59
You must be logged in to post a review.
Reviews
There are no reviews yet.