| Shaft Locking Type - Couplings | 2 Piece Clamp |
| Item | Rigid Shaft Coupling |
| System of Measurement | Inch |
| Bore Dia. | 1/2 in x 3/8 in |
| Material - Couplings | Steel |
| Outside Dia. | 1 1/8 in |
| Overall Length | 1 3/4 in |
| With Keyway / Without Keyway | With Keyway |
| Finish | black oxide |
| Screw Size (In.) | #8-32 |
| Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
| Max. Torque (In.-Lbs.) | 950 |
| Keyway Width (In.) | 1/8 x 3/32 |
| Type | Two Piece Clamp Type, with Keyway |
| Max. Torque | 950 in-lb |
| Material | Black Oxide Steel |
| Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
| Screw Size | #8-32 |
| Clearance Dia. | 1.328 in |
| Standards | ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
| Machined From | Bar Stock |
| Design | Four Vibration Resistant Socket Capscrews |
| Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
| Keyway Width | 1/8 in x 3/32 in |
| Clearance Dia. (In.) | 1.328 |
| Screw Material | Alloy Steel |
| Bore Tolerance | +0.0020 in / +0.0005 in |
| Included Screws | (8) Clamp Screws |
| Screw Material Finish | Black Oxide |
| Screw Location from Center | 0.43 in |
| Keyway Depth 2 | 3/64 in |
| Maximum Operating Temperature | 350 Degrees F |
| Fastener Tightening Torque | 49 lb-in |
| Maximum Bore Diameter | 1/2 in |
| Bore Diameter 2 | 3/8 in |
| Resistance Properties | Corrosion Resistant |
| Coupling Material Grade | 1215 |
| Maximum Torque | 950 in-lb |
| Clearance Diameter | 1.33 in |
| Bore Type | Round Keyed |
| Different Bore Sizes | Yes |
| Features | Precision Honed Bores, Vibration-Resistant Screws |
| Keyway Depth 1 | 1/16 in |
| Bore Diameter 1 | 1/2 in |
| Minimum Operating Temperature | -40 Degrees F |
| Coupling Outside Diameter | 1 1/8 in |
| Coupling Construction | Two-Piece |
| Keyway Width 2 | 3/32 in |
| Keyway Width 1 | 1/8 in |
| Coupling Material Finish | Black Oxide |
| Shaft Tolerance | +0.0000 in / -0.0005 in |
| Maximum Speed | 4,000 RPM |
| Recommended Gap | 0.063 in |
| Screw Thread Size | #8-32 |
| Number of Locking Screws | 8 |
| Shaft Locking Type | Clamp On |
| Zero Backlash | Yes |
| Minimum Bore Diameter | 3/8 in |
| Coupling Material | Carbon Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Coupling, Two Piece, Bore Dia 1/2 x 3/8 In, RULAND, Mfr# SPC-8-6-F
$77.16
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 1/2 in, Bore Diameter 2 3/8 in, Bore Type Round Keyed, Clearance Diameter 1.33 in, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 1 1/8 in, Different Bore Sizes Yes, Keyway Depth 1 1/16 in, Keyway Depth 2 3/64 in, Minimum Bore Diameter 3/8 in, Keyway Width 1 1/8 in, Keyway Width 2 3/32 in, Maximum Bore Diameter 1/2 in, Maximum Speed 4,000 RPM, Maximum Torque 950 in-lb, Overall Length 1 3/4 in
9999 in stock
Must order in multiples of 1
Subtotal:
$77.16
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.