S-1000-S1Sc40D Media Converter, Perle Systems, Mfr#: 05050844

$2153.99

Free shipping will be applied on orders over $50

S-1000-S1SC40D - Gigabit Media Converter: 1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-BX 1490nm TX / 1310nm RX single strand fiber, single mode (SC) [40 km/25 miles] - USA Power Cord

9999 in stock

Subtotal:
$2153.99
Final shipping and tax calculated in checkout
Brand Name: Perle Systems
Mfr #: 05050844
Availability: Ships in 20 days
SKU: GRG4395425
UPC: 734660508445
Category:

Analogues

PropertyValue
Depth3.1 in
Height1 in
Width4.7 in
Maximum Distance Supported24.85 Mile
Package ContentsS-1000-S1SC40D Media Converter, 100-240v AC, Regulated DC Adapter
Number of Network (RJ-45) Ports1
Number of SC Ports1
Product NameS-1000-S1SC40D Media Converter
Network (RJ-45)Yes
Product TypeTransceiver/Media Converter
Network Technology1000Base-BX, 10/100/1000Base-T
Total Number of Ports2
Form FactorWall Mountable, Rack-mountable, Rail-mountable
Weight (Approximate)1.10 lb
Environmentally FriendlyYes
Copper link on / Receive activity (LKC)This green LED is operational only when power is applied. The LED i on when the 1000Base-T link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-T interface has been taken down as a result of a fault on the 1000Base-T interface.
Input Supply Voltage6 - 30 vDC, unregulated ( 12 vDC Nominal )
ImmunityEN55024
DuplexFull (Default-Up)- The media converter will advertise Full Duplex Capable, Half Duplex Capable; AUTO (Down)-The Media converter will advertise Full Duplex Not Capable, Half Duplex Capable.
Operating AltitudeUp to 3,048 meters (10,000 feet)
Power / TSTThis green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
Laser SafetyEN 60825-1:2007
Electrical SafetyUL 60950-1
Auto-NegotiationEnabled (Default - Up)- In this mode the 1000Base-X and the 1000Base-T will negotiate to the HCD of the two link partners. The 1000Base-X will link up after the negotiation is completed and the 1000Base-T has linked up; Disabled- The 1000Base-X will not use auto negotiation. The 1000Base-T will negotiate to the HCD of the Switch settings and the link partner.
Bit Error Rate (BER)u003c10-12
Magnetic Isolation1.5kv
EmissionsFCC Part 15 Class A, EN55022 Class A
Power Consumption3.0 watts
Storage temperatureminimum range of -25Β° C to 70Β° C (-13Β° F to 158Β° F)
Dimentions120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches
Fiber Fault AlertThe Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled; Enabled (Default - Up); When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature; Disabled (Down)
Operating Humidity5% to 90% non-condensing
Universal AC/DC adapter100-240v AC, regulated DC adapter included
Storage Humidity5% to 95% non-condensing
1000Base-TSingle mode single SC Media Converter; RJ45 connector, 4 pair CAT 5 UTP cable or cable
Heat Output ( BTU/HR )10.2
Current250 mA
PauseWhen Fiber Auto Negotiation is disabled Pause should only be enabled when all devices connected to the media converter support pause; Enabled(Default)- The Media converter will advertise Pause capable, Asymmetric pause not needed during Auto-Negotiation; Disabled- The Media converter will advertise that it does not have Pause capability during Auto-Negotiation.
Power Connector5.5mm x 9.5mm x 2.1mm barrel socket
Fiber link on / Receive activity (LKF)This green LED is operational only when power is applied. The LED is on when the 1000Base-X link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-X interface has been taken down as a result of a fault on the 1000Base-T interface.
Remote LoopbackThe media converter can perform a loopback on the 1000Base-X fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. The 1000Base-T transmitter is taken off the interface.
Operating temperature0Β° C to 50Β° C (32Β° F to 122Β° F)
Country of Origin (subject to change)Canada
Package Quantity1
TAGS:
#S-1000-S1Sc40D Media Converter
#Perle Systems
#Mfr: 05050844
#Perle Systems
#GRG4395425
#mfr:05050844
#part number:05050844
#pn:05050844
#part code:05050844
#item number:05050844
#product code:05050844
#manufacturer number:05050844
#manufacturers part number:05050844
#mfn:05050844

Reviews

There are no reviews yet.

Add a review