| Property | Value |
|---|---|
| Width | 3.1 in |
| Height | 1 in |
| Size | Maximum frame size of 2048 bytes |
| Depth | 4.7 in |
| Network Technology | 100Base-ZX, 10/100Base-TX |
| ST Port Type | Duplex |
| Product Type | Transceiver/Media Converter |
| Total Number of Ports | 2 |
| Form Factor | External |
| Maximum Distance Supported | 74.56 Mile |
| Number of ST Ports | 1 |
| Weight (Approximate) | 10.58 oz |
| Environmentally Friendly | Yes |
| Number of Network (RJ-45) Ports | 1 |
| Network (RJ-45) | Yes |
| Product Name | S-110-S2ST120 Fast Ethernet Media Converter |
| Immunity | EN55024 |
| Heat Output ( BTU/HR ) | 7.2 |
| Magnetic Isolation | 1.5kv |
| Power / TST | This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode. |
| Fiber link on / Receive activity (LKF) | This green LED is operational only when power is applied. The LED is on when the 100Base-FX link is on and flashes with a 50% duty cycle when data is received. |
| Electrical Safety | UL 60950-1 |
| Emissions | FCC Part 15 Class B*, EN55022 Class B* |
| Filtering | 1024 MAC Addresses |
| Buffer | 512 Kbits frame buffer memory |
| Copper Duplex (FDC) | This green LED is operational only when power is applied. The LED is on when the 10/100Base-TX link is operatinal in full duplex mode. The LED is off when in half duplex. |
| 100Base-TX | Single mode dual ST Media Converters; RJ45 connector, 2 pair CAT 5, EIA/TIA 568A/B or better cable |
| Remote Loopback | The media converter can perform a loopback on the 100Base-X fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. The 100Base-TX transmitter is taken off the interface. |
| Universal AC/DC adapter | 100-240v AC, regulated DC adapter included |
| Duplex Fiber | Full (Default); Half |
| Speed Copper | 100 (Default); 10 |
| Fiber Duplex (FDF) | This green LED is operational only when power is applied. The LED is on when the 100Base-FX link is operatinal in full duplex mode. The LED is off when in half duplex. |
| Link Pass Through | Enabled (Default)- When the state of the receiver is changed on the 100Base-TX interface it is reflected on the 100Base-FX fiber transmitter. When the state of the receiver on the 100Base-FX interface is changed it is reflected on the 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the 100Base-TX transmitter is turned off. When the Far-End Fault Indication is cleared the transmitter is turned back on; Disabled- The 100Base-TX and the 100Base-FX fiber interface operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the 100Base-TX interface. |
| Auto-Negotiation (802.3u) | Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 100Base-TX interface. It is set to advertise full duplex; Disabled- The media converter sets the port according to the position of the speed and duplex switches. |
| Power Consumption | 2.1 watts |
| 10/100 Speed | This green LED is operational only when power is applied. The LED is on when the speed of the copper Ethernet port is running at 100 MBPS. The LED is off when in 10 MBPS |
| Operating temperature | 0 C to 50 C (32 F to 122 F) |
| Copper link on / Receive activity (LKC) | This green LED is operational only when power is applied. The LED is on when the 100Base-TX link is on and flashes with a 50% duty cycle when data is received. |
| Dimentions | 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches |
| Storage Humidity | 5% to 95% non-condensing |
| Laser Safety | EN 60825-1:2007 |
| Storage temperature | minimum range of -25 C to 70 C (-13 F to 158 F) |
| Power Connector | 5.5mm x 9.5mm x 2.1mm barrel socket |
| Operating Humidity | 5% to 90% non-condensing |
| Duplex Copper | Full (Default); Half |
| Current | 175 mA |
| Input Supply Voltage | 6 - 30 vDC, unregulated ( 12 vDC Nominal ) |
| Operating Altitude | Up to 3,048 meters (10,000 feet) |
| Auto-MDIX (Internal Strap) | If Auto-Negotiation (802.3u) is enabled, the media converter uses the HP Auto-MDIX method for the 100Base-TX interface. If Auto-Negotiation (802.3u) is disabled the Media converter will use the RX Energy method on the 100Base-TX interface to set the port MDI or MDIX whichever is appropriate; Enabled (Default)- Either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable; Disabled- If the partner device on the other end of the cable does not have the Auto-MDIX feature a specific cable, either a straight-through or crossover will be required to ensure that the media converter's transmitter and the partner devices transmitter are connected to the others receiver. The Media converter's 100Base-TX port is configured as MDI-X with this switch setting. |
| Country of Origin (subject to change) | Canada |
| Package Quantity | 1 |
S-110-S2St120 Media Converter, Perle Systems, Mfr#: 05050554
$3247.99
Free shipping will be applied on orders over $50
S-110-S2ST120 - 10/100Base-TX Media and Rate Converter: 10/100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-ZX 1550nm single mode (ST) [120 km/74.6 miles] - USA Power Cord
9999 in stock
Subtotal:
$3247.99
You must be logged in to post a review.
Reviews
There are no reviews yet.