| Item | Safety Controller |
| Mounting | Surface or DIN rail |
| Enclosure Material | Plastic |
| Output Type | 2 relays, 2 NO contacts (4 NO total) || solid state, 6, volt-free |
| IP Rating | 20 |
| Input Power | 24V DC |
| Safety Output Configuration | 4NO |
| Safety Output Ratings | 1.5A @ 24V DC |
| Number of Inputs | 32 |
| Features | 1 RJ45 (Programming + Modbus) |
| Height | 5.96 in |
| Operating Temp. | -10 to 55 Degrees C |
| Standards | CSA, TUV, UL |
| Width | 2.91 in |
| Response Time | 20 msec |
| Depth | 6.02 in |
| Input Protection Type | external fuse 16 A |
| Local Signalling | 46 LEDs |
| Ambient Air Temperature For Operation | -10-55 °C |
| Output Thermal Current | 4 A for both outputs simultaneously || 6 A for 1 output and 2 A for the other relay output |
| Ip Degree Of Protection | IP20 conforming to EN/IEC 60529 |
| Mounting Support | mounting plate |
| Parity | even Modbus || no Modbus || odd Modbus |
| Minimum Output Current | 10 mA relay output |
| Minimum Output Voltage | 17 V relay output |
| Maximum Line Resistance | 100 Ohm <2000 m |
| Function Of Module | dynamic monitoring of hydraulic valves on linear presses || monitoring safety stop at top dead centre on eccentric press || muting function of light curtains || position selector || safety mat monitoring || safety time delays || shaft/chain breaking monitor || zero speed detection || light curtain monitoring category 4 EN/IEC 61496 || two-hand control category 3 EN 574/ISO 13851 || eccentric press || emergency stop monitoring, with or without time delay, 1 or 2-channel wiring || enabling switch monitoring, 2 or 3 contacts || foot switch monitoring || guard monitoring for injection presses and blowing machines || guard monitoring with 1 or 2 limit switches || hydraulic press || magnetic switch monitoring |
| Breaking Capacity | 180 VA holding AC-15 C300 relay output || 1800 VA inrush AC-15 C300 relay output, 2 A 24 V static output circuit || 1.5 A 24 V DC-13)50 ms relay output |
| [Uc] Control Circuit Voltage | 28.8 V |
| Supported Modbus Function | 01 8-bit output data/32-bit input data || 02 32-bit input data/8-bit output data || 03 information and errors |
| Safety Module Name | XPSMC |
| Data Format | 1 start bit/8 data bits || 1 stop bit even or odd || 2 stop bits without parity || RTU (Remote Terminal Unit) mode |
| Type Of Start | configurable |
| Ambient Air Temperature For Storage | -25-85 °C |
| [Uimp] Rated Impulse Withstand Voltage | 4 kV III IEC 60647-5-1, DIN VDE 0110 part 1 |
| Associated Fuse Rating | 16 A gL power supply || 4 A gL relay output || 6 A fast blow relay output |
| Power Consumption In W | 12 W |
| [Ith] Conventional Free Air Thermal Current | 16 A relay output || 6.5 A static output circuit |
| Exchange Size | 14 words |
| Number Of Addresses | 1-247 Modbus |
| Safety Level | can reach PL e/category 4 EN 954-1/EN/ISO 13849-1 || can reach SIL 3 IEC 61508 |
| [Ui] Rated Insulation Voltage | 300 V 2)IEC 60647-5-1, DIN VDE 0110 part 1 |
| Product Certifications | CSA || UL || TUV |
| Product Or Component Type | configurable safety controller |
| Synchronisation Time Between Inputs | depending on configuration selected |
| Safety Use Category | category 4 maximum EN 954-1/EN/ISO 13849-1 || PLE maximum EN/ISO 13849-1 || SIL 3 maximum IEC 61508 |
| [Us] Rated Supply Voltage | 24 V DC - 20 to 20 % |
| Communication Port Protocol | Modbus 1 RJ45, serial link 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps |
| Method Of Access | slave |
| Country of Origin (subject to change) | France |
| Package Quantity | 1 |
Safety Controller, 24VDC, 32 Inputs, SCHNEIDER ELECTRIC, Mfr# XPSMC32Z
$1836,99
Free shipping will be applied on orders over $50
Safety Controller, Number of Inputs 32, Safety Output Ratings 1.5A @ 24V DC, Safety Output Configuration 4NO, Response Time 20 msec, Mounting Surface or Din Rail, Enclosure Material Plastic, IP Rating 20, Input Power 24V DC, Height 5.96 in, Width 2.91 in, Depth 6.02 in, Operating Temp. -10 to 55 Degrees C, Features 1 RJ45 (Programming + Modbus), Standards CSA, TUV, UL
0 in stock
Must order in multiples of 1
Subtotal:
$1836.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.