Item - Self Priming Pumps | Self Priming Centrifugal Pump |
Item | Centrifugal Pump |
HP - Pumps | 3 hp |
Inlet | 2 in Flanged |
Voltage - Pumps | 208 to 230/460V AC |
Outlet | 1-1/2 in FNPT |
Phase - Pumps | 3 |
HP | 3 |
Wetted Materials | 300 Stainless Steel, 316 Stainless Steel, Buna-N, Carbon, Cast Iron, Ceramic, Silicon Bronze |
Voltage | 208-230/460 |
Max. Head - Pumps | 138 ft |
Best Efficiency Range GPM @ Head | 80 to 120 gpm @ 108 to 75 ft |
Outlet Size - Pumps | 1-1/2 in NPT |
Seal Material | 316 Stainless Steel, Buna Elastomer, Carbon, Ceramic |
Max. Dia. Solids - Pumps | Gray Water |
Suction Lift | 25 ft. |
Max. Pressure - Pumps | 60 psi |
Motor RPM | 3,500 RPM |
Motor Enclosure - Pumps | Open Dripproof |
Housing Material - Pumps | Cast Iron |
Inlet Size - Pumps | 2 in Flange |
Port Rotation | No |
GPM @ 15 PSI | 190 |
Inlet Pressure | 20 psi |
Motor Ambient Temp. Rating | 40 Degrees C |
Duty | Continuous |
Best Efficiency GPM @ PSI | 90 @ 45 |
GPM of Water @ 30 Ft. of Head | 195 |
Cord Length | No Cord |
Installation Position | Horizontal |
Hz | 60 |
Suction Lift - Pumps | 25 ft |
Duty - Pumps | Continuous |
Phase | Three |
GPM of Water @ 50 Ft. of Head | 170 |
Thermal Protection | No |
Impeller Type | Closed |
Motor Type | Open Drip Proof |
Bearing Type | Sleeve |
Max. Temp - Pumps | 160 Degrees F |
Housing Material | Cast iron |
Max. Liquid Temp. | 160 Degrees F |
Motor Enclosure | Open Dripproof (ODP) |
Self-Priming | Yes |
Impeller Material | Silicon Bronze |
Length | 21 7/8 in |
GPM @ 20 PSI | 170 |
GPM @ 40 PSI | 8.2 |
GPM of Water @ 40 Ft. of Head | 182 |
Amps | 8.5-8.0/4.0 |
Max. Pressure | 75 psi |
Frame | 140JM |
Height | 13 1/4 in |
GPM of Water @ 20 Ft. of Head | 205 |
Max. Case Pressure | 75 psi |
Port Rotation - Pumps | No |
Width | 10 in |
Diameter | 6 in |
Cord Type | None |
GPM @ 25 PSI | 150 |
Manufacturers Warranty Length | 1 yr |
GPM @ 10 PSI | 205 |
GPM @ 45 PSI | 82 |
Max. Specific Gravity | 1.0 |
Max. Head | 60 ft. |
GPM @ 35 PSI | 95 |
GPM @ 30 PSI | 135 |
Cord Size | None |
Features | Back Pull Out to Reduce Maintenance Down Time, Replaceable Sleeve Provides Motor Shaft Protection |
Shaft Material | Stainless Steel |
Seal Type | Mechanical |
Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 50 ft of Head (Maximum) | 170 gpm |
Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
Shut Off Pressure (Maximum) | 50 psi |
Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Electrical Connection Type | Hardwired |
Series | SP |
Standards | ANSI 61, NSF Certified |
Motor Frame Designation | 140JM |
Flow Rate @ 20 ft of Head (Maximum) | 101 gpm |
Wetted Material | 316 Stainless Steel, Bronze, Buna-N Carbon, Ceramic |
Specific Gravity (Maximum) | 1 |
Mounting Orientation | Horizontal |
Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
Minimum Flow Rate | 20 gpm |
Priming | Self-Priming |
Manufacturer Warranty Length | 1 yr |
For Use With Potable Systems | No |
Pump Housing Material | Cast Iron |
Pumping Application | Dewatering, Lawn Irrigation, Liquid Transfer, Live Stock Watering, Plot Irrigation |
Intake Size | 2 in |
Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
Overall Width | 11.4 in |
Flow Rate @ 40 ft of Head (Maximum) | 182 gpm |
Thermal Overload Protection | No |
Compatible Discharge Pipe Size | 1 1/2 in |
Compatible Intake Pipe Size | 2 in |
Motor Enclosure Type | ODP |
Maximum RPM | 3,500 RPM |
Impeller Design | Closed |
Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
Feet of Head (Minimum) | 46.2 ft |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Frequency | 60 Hz |
Intake Type | NPT |
Horsepower | 3 hp |
Nominal Voltage | 208-230/460V AC |
Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Maximum Feet of Head | 115.5 ft |
Discharge Type | NPT |
Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
Intake and Discharge Size | 2 in , 1 1/2 in |
Maximum Flow Rate | 138 gpm |
Compatible with Media Type | Water |
Flow Rate @ 10 ft of Head (Maximum) | 136 gpm |
Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
Overall Height | 13.2 in |
Flow Rate @ 5 ft of Head (Maximum) | 138 gpm |
Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
Best Efficiency Head | 75 to 108 ft |
Nameplate Voltage | 208-230/460V AC |
Flow Rate @ 30 ft of Head (Maximum) | 195 gpm |
Duty Cycle | Continuous |
Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
Overall Length | 21.8 in |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Self Priming Centrifugal Pump, 3 hp, 208 to 230/460V AC, 3 Phase, 138 ft Max Head, GOULDS WATER TECHNOLOGY, Mfr# 30SPH70
$2781,92
Free shipping will be applied on orders over $50
Centrifugal Pump, Phase Three, Pump Housing Material Cast Iron, Horsepower 3 hp, Nameplate Voltage 208-230/460V AC, Flow Rate @ 40 ft of Head (Maximum) 182 gpm, Maximum Feet of Head 115.5 ft, Compatible Intake Pipe Size 2 in, Intake Type NPT, Compatible Discharge Pipe Size 1 1/2 in, Discharge Type NPT, Motor Enclosure Open Dripproof, Maximum Flow Rate 138 gpm, Flow Rate @ 5 ft of Head (Maximum) 138 gpm, Flow Rate @ 10 ft of Head (Maximum) 136 gpm, Flow Rate @ 20 ft of Head (Maximum) 101 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$2781.92
You must be logged in to post a review.
Reviews
There are no reviews yet.